Page 3
All the information contained in this document is subject to changed without prior notice. HiTi Digital Inc. cannot be held liable for any errors that may be found in this manual, or for any loss or damage arising accidentally or as a result of dissemination or use of this manual.
Page 4
ID card, credit cards, membership cards and badges from various level of thickness and color style. Please ensure HiTi CS card printer to use the original consumables from HiTi Digital Inc. For more details, visit our website at www.hiti.com .
HiTi CS-200e user manual Chapter1. Getting ready 1.1 Checking box contents HiTi CS card printer is supplied with several accessories and please do take time to check it closely. The accessories contents list may vary depending from your region/location. If any of below item is missing, please contact your nearest HiTi customer support facility of your local HiTi CS card printer distributor.
HiTi CS-200e user manual 1.2 Appearance of the printer and key functions Top cover opening button Input card cover Input card feeder (100cards) Manual releasing card jam screw socket (slotted screwdriver) Spec. label ON / OFF hard power switch button...
Page 7
HiTi CS-200e user manual Thermal print head Ribbon spool fitting position (color coded) Ribbon ID key socket Card thickness adjustment gauge Cleaning roller socket...
HiTi CS-200e user manual 1.3 Installation 1.3.1 Ribbon Installing Using the original HiTi CS Card Printer Ribbon consumables will optimize your printer’s performance and avoid causing damages to it. Use of non HiTi original consumables will void the manufacturer’s warranty policy for the printer.
Page 9
HiTi CS-200e user manual 1.3.2 Printer Connecting (Power & USB) Power a. Connect power cable to power adaptor, then plug the power connector to printer’s power socket b. Plug the power plug to an earthed power socket Please make sure the power plug is connected into a properly protected and earthed electrical source.
Page 10
HiTi CS-200e user manual 1.3.3 Card Placing Loading (Automatic) For optimum printing quality, please ensure all cards are CR-80 standard with ISO 7810 certified. Please do not touch the printable surface and not to use any dusty, damaged, folded or embossed cards in your printer.
HiTi CS-200e user manual Collecting When the printing and/or encoding cycle is completed, the printed and/or encoded card will be returned into output hopper which is designed with a capacity of 50 x 0.8mm cards. Adjusting The printer has a manual adjustable card thickness mechanism which can be located inside the printer unit when the top cover is open.
HiTi CS-200e user manual Chapter2. Start printing 2.1 Print driver installation For your own safety, please make sure the power cable is always unplugged before attempting any service maintenance work. This is an important step and requires special attention to configure the printer and driver correctly before start using it.
HiTi CS-200e user manual 2.2 Print settings Before start using your HiTi card printer, it is very important to double check and/or change the default print driver settings. Those settings includes in the following list: Ribbon types Card types Card thickness...
HiTi CS-200e user manual 2.3 Print software application HiTi card printer provides a value added software application called “HiTi CardDésirée CS” which allows you to edit most of your card design through this easy and user friendly software. For more information, please refer the...
HiTi CS-200e user manual Chapter3. Printer maintenance 3.1 General warranty information notice announcement HiTi CS card printer is professional designed to provide you a long term service duty with minimum regular mainte- nance required. Therefore please do comply with the instructions given in below to ensure your printer unit is covered by warranty condition.
HiTi CS-200e user manual 3.2 Routine / Regular printer cleaning The print head warranty is strictly related to routine cleaning of your printer, and if failed to do so under any circumstance, the print head warranty will be cease immediately.
Page 17
HiTi CS-200e user manual 3.2.1 Using cleaning card Each pack/box of HiTi original consumables should contain one single piece of cleaning card. a. Remove any remaining cards from input card feeder. b. Insert pilled protection film from both sides’ cleaning card into the feeder.
Page 18
HiTi CS-200e user manual 3.2.2 Replacing cleaning roller Each pack/box of HiTi original consumables should contain one single piece of cleaning roller. a. Press the top opening button to open the top cover gently and remove cleaning roller from designated location.
Page 19
HiTi CS-200e user manual 3.2.3 Cleaning TPH (Thermal Print Head) Please unplug the power cable from printer before start doing TPH cleaning process. Try not to make any direct physical contact to TPH with any metal/sharp objects or your fingers.
HiTi CS-200e user manual Chapter4. Help Diagnosis 4.1 Warnings / Error messages and diagnosis HiTi CS card printer is designed to work independently and also to keep user involvement down to a minimum level. However, it would be useful to gain some familiarity with few basic warning messages knowledge during the operation.
HiTi CS-200e user manual 4.1.2 Control panel warning messages PMessages Displayed Reasons Solutions Cover Open Top cover door is opened Close the top cover door. Flipper Cover Open Flipper cover door is opened Close the flipper cover door. IC Chip Missing Ribbon IC chip is not inserted Install ribbon IC chip into printer’s IC chip socket.
HiTi CS-200e user manual 4.2 Printing a demo chart We strongly recommend that you do print a demo chart card to ensure your printer is working properly. This demo chart card shows various technical information and print out quality for future reference which you may be asked by your local service agent or HiTi customer service department staff members.
HiTi CS-200e user manual 4.4 Troubleshooting 4.4.1 Printing problems Check the printer driver Check the printer power supply and USB cable Nothing in action Check the ribbon and card Print a demo chart Check the ribbon Printed a blank card...
Page 24
HiTi CS-200e user manual 4.4.2 Releasing from card jams Please remove the jammed card by the following instruction displayed on LCM control panel of the printer before continuing the printing job. Open the printer cover door Remove the ribbon Follow the instruction on the LCM control panel with three options: Auto remove card, Semi-auto removal and Manual removal During semi-auto removal and manual removal process, please do not put your hands into the card printer.
HiTi CS-200e user manual 4.5 Technical support If you have come across any difficulties in configuring and/or operating your HiTi card printer, please read this manual carefully. If you are unable to manage solving your problems, you can obtain further information or help from your local authorized distributor or reseller.
HiTi CS-200e user manual Appendix A: Technical Specifications HiTi CS-200e Card Printer Color printing module 300dpi print head USB connection Ethernet TCP/IP connection as an optional module (ETA: Q3/2011) General Technical Features 32MB RAM / 1MB Flash 50 cards output hopper (0.8mm/30mil)
Page 27
HiTi CS-200e user manual 5 panel YMCKO color ribbon: 400prints/roll 1/2 panel YMCKO color ribbon: 560prints/roll Ribbon Types Monochrome ribbon: up to 1000prints/roll (available in Black) 400 cards high capacity input hopper Flipper module Magnetic encoding module (ISO 7811 HiCo/LoCo or JIS2 magnetic strip encoder)
Page 52
HiTi CS-200e HiTi CS-200e 300dpi 2011 32MB / 1MB (0.8mm/30mil) 1 (YMCKO) = 2000/XP/Vista Pentium R / 133MHz 128MB 100MB Windows 2000/XP/Vista/Windows 7 (32 & 64 bits) Macintosh OS X version 10.2/10.3/10.4/10.5/10.6 Linux HiTi CardDésirée CS Windows 2000/XP/Vista/7 MS Excel...
Page 53
HiTi CS-200e YMCKO YMCKO 1000 (ISO 7811 HiCo/LoCo or JIS2) (ISO 7816-2 / PC / SC, EMV2000-1) (ISO 14443A & B, 15693) ISO CR-80 / ISO 7810 (53.98mm x 85.60mm) 0.3mm(10mil) ~ 1.0mm(40mil) 0.5mm (0.8mm/30mil) (0.8mm/30mil) 198mm(W) x 355mm(L) x 219mm(H) 10/100 Mbps AC input: 100~240V ~ 2.5A, 50~60Hz / DC output: 24V=4.16A...
Page 78
HiTi CS-200e Hiti CS-200e 300dpi 2011 32MB / 1MB (0.8mm/30mil) 1 (YMCKO) = 2000/XP/Vista Pentium R / 133MHz 128MB 100MB Windows 2000/XP/Vista/Windows 7 (32 & 64 bits) Macintosh OS X version 10.2/10.3/10.4/10.5/10.6 Linux Hiti CardDésirée CS Windows 2000/XP/Vista/7 MS Excel...
Page 79
HiTi CS-200e YMCKO YMCKO 1000 (ISO 7811 HiCo/LoCo or JIS2) (ISO 7816-2 / PC / SC, EMV2000-1) (ISO 14443A & B, 15693) ISO CR-80 / ISO 7810 (53.98mm x 85.60mm) 0.3mm(10mil) ~ 1.0mm(40mil) 0.5mm (0.8mm/30mil) (0.8mm/30mil) 198mm(W) x 355mm(L) x 219mm(H) 10/100 Mbps AC input: 100~240V ~ 2.5A, 50~60Hz / DC output: 24V=4.16A...
Page 80
HiTi Digital, Inc. 2011 HiTi Digital, Inc. All Rights Reserved. Specifications are subject to change without prior notice. P/N:39.C0800.001...