Table of Contents
Advertisement
Chapter 2 Configuration
To access the System window, click the System button in the Maintenance directory.
When you configure the Router, you will need to restart the
Router to take the settings effect. Click Reboot to restart the
Router.
Once you have configured the Router to your satisfaction, it is a
good idea to back up the configuration file to your computer. To
save the current configuration settings to your computer, click
the Backup Settings button. You will be prompted to select a
location on your computer to put the file. The file type is bin and
may be named anything you wish.
To load a previously saved configuration file, click the Browse
button and locate the file on your computer. Click the Upload
Settings button to load the settings from your local hard drive.
Confirm that you want to load the file when prompted. The
Router will reboot and begin operating with the configuration
settings that have just been loaded.
To reset the Router to its factory default settings, click the
Restore Default Settings button. You will be prompted to
confirm your decision to reset the Router. The Router will
reboot with the factory default settings including IP settings
(192.168.1.1) and Administrator password (admin).
D-Link DVA-G3672B User Manual
Maintenance – System
60
Advertisement
Table of Contents
