Table of Contents
Advertisement
Chapter 2 Configuration
To access Default Gateway, point to the Routing on the left window and click Default Gateway submenu, or click the Default
Gateway button in the Routing window.
This page can either automatically assign a default gateway to
the device or manually type in a default gateway or the device
or interface. It is recommended to leave Enable Automatic
Assigned Default Gateway ticked to automatically detect the
Gateway IP address.
To access RIP, point to the Routing on the left window and click RIP submenu, or click the RIP button in the Routing window.
The Router supports RIP version 1 and 2 used to share routing
tables with other Layer 3 routing devices on your local network
or remote LAN. The Operation setting refers to the RIP request.
Select Active to allow RIP requests from other devices. Select
Passive to instruct the Router to make RIP requests for routing
tables from other devices.
To enable RIP, tick the Enable Global RTP Mode check box,
select the Version (1, 2, or Both) and Operation (Active or
Passive), and tick the Enable check box in the corresponding
entry. Click the Apply button. Go to Maintenance -> System
and click Reboot to restart the device and let your changes
take effect.
D-Link DVA-G3672B User Manual
Routing – Default Gateway
Routing – RIP
56
Advertisement
Table of Contents
