Table of Contents
Advertisement
Chapter 2 Configuration
To access ADSL, point to the Network Tools on the left window and click ADSL submenu, or click the ADSL button in the Network
Tools window.
This window allows the user to set the configuration for ADSL
protocols. For most ADSL accounts the default settings
Autosense will work. This configuration works with all ADSL
implementations. If you have been given instructions to change
the Modulation method used, select the desired option from the
Modulation Type drop-down list and click the Apply button.
Leave the Capability and Test Mode settings unchanged unless
otherwise instructed by your ISP. Both Bitswap Enable and
Seemless Rate Adaption (SRA) Enable deal with tests that
determine the line condition between your Router and the ISP's
Central office.
D-Link DVA-G3672B User Manual
Network Tools – ADSL
52
Advertisement
Table of Contents
