Sleep Timers [Snze] - SpaNet SV2 User Manual

[SNZE] Sleep Timer Menu
How to program sleep timers
Press and hold +
Press
1.DAY
Days of week
1.BGN
Begin time
1.END
End time
Press
IMPORTANT NOTES
•
There is a default sleep timer pre-programmed into each SV controller. By default: Sleep Timer 1 [1.SNZ] is set to operate every day of the week (Sat – Fri) with sleep period between 22:00 (10PM) and 07:00 (7AM)
•
Sleep Timers will override any programmed PowerSAVE [P.SAV] times. Spa users must consider cancelling the default sleep timer when programming P.SAV times for off-peak heating and filtration (refer page 25)
• Freeze protection will override sleep timers
SV Series Spa Controls
to enter adjustment
2.DAY
Days of week
2.BGN
Begin time
2.END
End time
to confirm & save
Accessed via the Setup Menu, Sleep timers are a very handy feature that enables the
user to stop all spa activity during certain times of day or night. While the controller is
sleeping NO automatic heating or filtration maintenance will occur, however the spa can
still be operated by manual use without the need to adjust sleep time settings.
There are two individual sleep timers that can be set, each of which can operate on one
or more specified weekdays. This enables the user to program different sleep times for
different days (ie. weekdays vs weekends), as well as custom settings on a particular
day/time where the user may want the spa silenced.
Press and hold
Press button until [SNZE] is displayed
Press button to enter sleep timers (SNZE) adjustment
Press or to select from [1.SNZ] Sleep Timer 1; [2.SNZ] Sleep
Timer 2; [R.SET] Reset sleep times to default; [EXIT] Exit sleep menu
Press button to confirm and move to the next setting
Each sleep time setting consists of a week day setting, start time and stop time (refer
table below).
Item Description
#.DAY Selected day of operation
Begin Time
#.BGN
Sleep time period begins
End Time
#.END
Sleep time period ends
Press or to adjust each setting
Press button to confirm setting and move to the next setting
24
and buttons together until [MODE] is displayed
Notes
Sat / Sun / Mon / Tue / Wed / Thu / Fri
Sat-Sun / Mon-Fri / Sat-Fri / :
Default = Sat-Fri (Note : = disabled)
Adjustable: 00:00 - 23:59
Default = 22:00 (10PM)
Adjustable: 00:00 - 23:59
Default = 07:00 (7AM)