Light Operation (Sv3.T / Sv4.T Models) - SpaNet SV2 User Manual

Spa Light Operation (SV3.T / SV4.T Models)
Multi-colour LED lighting effect modes
Press
Press
SV Series Spa Controls
to turn light(s) ON
SV3.T only
to confirm & save
Light Button
The light buttons are used to toggle the spa light(s) ON / OFF and to access the light
mode menus. The features that can be adjusted are the light colour, light effect mode,
light effect transition speed, and light brightness. All light settings are saved and will be
restored the next time the light is turned ON, for future ON / OFF use.
Press button to turn light(s) on / off
SV4.T models go straight to the next step
SV3.T models => press
When light is turned on keypad will display light mode menu showing current
light mode in use (refer illustration aside)
Press or
WHTE White Light
UCLR User Colour
FADE Fade Effect
STEP Step Effect
PRTY Party Effect
Press button to confirm light mode selection
Press to access light speed / colour menu
Dependant on light mode selected the keypad will display one of three light
mode option screens (refer aside)
L.BRT Light Brightness
CL:xx User Colour Number (CL:00 - CL:20)
L.SPD Light Effect Transition Speed
Press or
Press button to save each setting and move to the next setting
IMPORTANT NOTES
• If left switched on, light(s) will turn off 15 minutes after the expiry of the
pump/blower time out periods.
17
to access light mode menu
button to navigate through choice of light modes:
button to adjust each setting