Air Blower Operation - SpaNet SV2 User Manual

Air Blower Operation

Blower button functions
Press once for variable speed mode
Press
Press
Press twice for ramping mode
Press again to turn blower OFF
SV Series Spa Controls
to save and exit menu
again to turn blower OFF
Blower Button
The blower button is used to toggle the air blower ON/OFF and allow adjustment of the blower
speed. The selected speed is saved and will be restored the next time the blower is turned on, for
future ON/OFF use. Two modes of operation are provided:
Variable Speed Mode
In this mode the blower speed can be manually adjusted to one of five (5) x different speed
settings.
Press button once to activate blower in variable speed mode
Display will flash VARI mode then present b.SPD (blower speed) adjustment menu
(refer illustration aside)
Press or buttons to increase or decrease the blower speed
(note: bar graph segments adjust with blower speed)
Press button to exit menu or wait for 10 second display time out
Press button a second time to turn blower off
Ramping Mode
In this mode the blower speed gradually increases and decreases through the blower speed range
in a ramping manner.
Press button twice to activate blower in ramping mode
Display will flash RAMP mode and blower operates in a ramping manner
Press button a second time to turn blower off
IMPORTANT NOTES
• When blower is turned on it runs at maximum speed for 3-4 seconds before changing to
preset speed (this is normal)
• If left running, blower will turn off after a 30 minute time out period. Time out period can be
adjusted from 10 to 60 minutes via the Setup Menu item T.OUT (refer page 21).
15