Setup Menu - SpaNet SV2 User Manual

Setup Menu

How to program advanced configuration settings
Press and hold
Press
Press
IMPORTANT NOTES
•
The setup menu item settings are stored in non volatile memory (EEPROM) and
are remembered when power is turned off. No need to reprogram settings when
power is restored.
•
A ten (10) second idle menu time out period exists. If a button press is not detected
for 10 seconds the menu will time out and the screen will return to the default
display mode.
SV Series Spa Controls
+
to enter adjustment
to confirm & save
Setup Menu
The SV controllers feature an advanced setup menu which allows customisation of the
adjustable controller settings. Menu item options are detailed in the list below.
To enter menu press and hold
is displayed
Press or
Press to enter menu item adjustment
Press or
Press to confirm setting and exit menu
Menu Setting
Item
MODE Operating Mode
FILT Hours of filtration per day
F.CYC Filtration cycle blocks
SNZE Sleep time menu
1.SNZ Sleep timer 1
2.SNZ Sleep timer 2
R.SET Reset sleep timers
EXIT Exit sleep time submenu
P.SAV Power save settings
W.CLN Automatic sanitise time
D.DIS Default display mode
T.OUT Load time out period
Heat pump
H.PMP
operating mode
Heat pump with
H.ELE
SV element boost
EXIT Exit setup menu
21
and buttons until [MODE]
to navigate through menu item list
to adjust setting
Notes
Normal / Economy / Away / Week Modes
1 to 24 hours
Set filtration to run every 1,2,3,4,6,8,12 or 24 hrs
[1.DAY] Days of week, [1.BGN] Begin Time, [1.END] End
Time
[2.DAY] Days of week, [2.BGN] Begin Time, [2.END] End
Time
Reset sleep timers to factory defaults
Off, Low , High
(off-peak filtration) (off-peak filtration & heating)
Daily run time of automatic sanitise cycle (00:00 - 23:59)
Water Temp (W.TMP), Set Temp (S.TMP) or Clock (TIME)
Pump / Blower time out period (10 to 60 minutes)
Auto (heat or cool) / Heat / Cool / Off (heat pump
disabled)
On = Heat pump + SV element combined for heating
Off = Heat pump only