SpaNet SV-3T Quick Start Manual

AUTOMATIC INDICATOR LED
This LED will turn on whenever
the filtration pump is in automatic
mode.
HEATER INDICATOR LED
This LED will turn on when the
heater or heat pump (if fitted)
is operating.
SANITISER INDICATOR LED
This LED will turn on to indicate
that the ozone or uv sanitiser
unit is operating (if fitted).
SLEEP TIMER
INDICATOR LED
This LED will turn on
when the controller is INVERT SCREEN
in a sleep mode. BUTTON
Press to flip screen
o
180 for easy viewing
when spa in use.
POWER
DISPLAY MODE ICONS
Water Temperature
Set Temperature
Clock
STATUS ICONS
Keypad locked
Sanitise cycle operating
OFF
0 / UV ON
3
: 10 30
AM
PM
SA SU MO TU WE TH FR
A
PUMP (A,B,C) BUTTONS
Used to toggle filtration
pump and / or any
additional jet pump(s)
on / off (if fitted).
SMART
MENU ICONS
Sleep timer menu icon
Light menu icon
Blower menu icon
Filtration cycle operating
Fault condition has occured
°C
°F
MODE
SPD
MODE
BRT
3 8.0
°C
°F
SET TEMP
SPD/CLR
B C
SV-3T
BLOWER BUTTON SANITISE BUTTON
Press once to activate
Press to toggle blower
on/off. A single press a 20 min sanitisation
turns blower on in and clean up cycle to
refresh water quality
vari-speed mode. Use
up & down buttons to after spa use. A
vary speed. A double second press will
cancel the cycle if
press activates the
ramping mode. already running.
QUICK REFERENCE GUIDE
UP BUTTON
Short single presses toggle through
the three display modes: W.TMP =
Water Temperature, S.TMP = Set
Temperature, TIME = Clock.
Holding the button will force the
controller to begin adjusting the set
temperature and will raise the set
temperature point.
Also used for adjusting settings.
LIGHT (ON/OFF) BUTTON
Used to toggle spa lights on/off.
LIGHT (MODE) BUTTON
Press to activate light mode menu &
use up & down buttons to select one
of five different lighting effect modes.
OK BUTTON
Used to confirm and save setting
adjustments or to enter setting
adjustment menus.
LIGHT SPEED / COLOUR
Press to activate light speed or
user colour selection menus. Use
up & down buttons to adjust.
DOWN BUTTON
Short single presses toggle through the three
display modes: W.TMP = Water Temperature,
S.TMP = Set Temperature, TIME = Clock.
Holding the button will force the controller to
begin adjusting the set temperature and will
lower the set temperature point.
Also used for adjusting settings.