Battery Charging And Care; Charging The Battery - Drive Medical Daytona 3 Owners Manual Instructions

BATTERY CHARGING AND CARE

CHARGING THE BATTERY

Follow the procedure below step by step:
1. Turn the power switch to (OFF).
2. Connect the charger's power cord into the power outlet.
3. Open the charging rubber cover on the rear shroud. Then connect the charger's round
plug to the charging socket.
4. Switch the charger on.
5. Both the charger's red and orange LEDs will be lit when beginning charging. The charging
duration is about 10 hours. To ensure optimum performance a 12-14 hour charge is
recommended.
6. Both the charger's LEDs will be lit during the charging process. The orange LED will turn
green when charging is complete.
7. Turn off the charger, disconnect the power cord and the round plug from charger socket
on the scooter.
17