Introduction - Skyrc Quattro B6AC Instruction Manual

INTRODUCTION

Congratulations on your choice of the SKYRC QUATTRO B6AC digital intelligent charger from
SKYRC Technology Co., Ltd. You are now the owner of a compact charger with battery
management and integral balancer.
The unit is simple to use, but the operation of a sophisticated automatic charger such as
the SKYRC QUATTRO B6AC does require some knowledge on the part of the user.
These operating instructions are designed to ensure that you quickly become familiar
with its functions.
It is therefore important that you read right through the Operating Instructions, Warning
and Safety Notes before you attempt to use your new automatic charger for the first time.
We hope you have many years of pleasure and success with your new battery charger.
SKYRC QUATTRO B6AC is a high-performance, micro processor control charge/discharge
station with battery management suitable for use with all current battery types. With integral
equalizer for six-cell Lithium-Ion (LiIon), Lithium-Polymer (LiPo) and Lithium-Ferrum (LiFe)
batteries.
Maximum 6A charge current; can be powered by a 12 Volt car battery or from the 110V AC(US
Version) or 220V AC
And the circuit features four totally independent identical power outputs which are powered 50
watts each. Total powers are 200 watts. As a result , it can charge or discharge up to 4 x 15 cells
of NiCd/NiMH or 4 x 6 series of Lithium batteries simultaneously. Quattro B6AC has four
individual cell voltage balancer at each outputs, so it does not required any balancer separately
when charging Lithium Battery (LiPo/LiIon/LiFe) for voltage balancing.
When a Nickel battery is fully charged, the unit terminates the process using the Delta-Peak
method. Lithium and lead (Pb) batteries are charged using the CC-CV method.
The fan cooling system is so smart and efficient. The fan speed is controlled by
internal temperature sensor.
Following instructions only apply to one of the four chargers, as all of them operate
according to same principle.
Please BE SURE to read these instructions and Warning and Safety Notes before you
use the charger for the first time.
It can be dangerous to mis-handle batteries and battery chargers, as there is always a
risk of batteries catching fire and exploding.
Liability Exclusion
This charger is designed and approved exclusively for use with the types of battery
stated in these Instruction Manual. SKYRC accepts no liablility of any kind if the charger
is used for any purpose other than that stated. We are unable to ensure that you follow
the instructions supplied with the charger, and we have no control over the methods you
employ for using, operating and maintaining the device. For this reason we are obliged
to deny all liability for loss, damage or costs which are incurred due to the incompetent
or incorrect use and operation of our products, or which are connected with such
operation in any way. Unless otherwise prescribed by law, our obligation to pay
compensation, regardless of the legal argument employed, is limited to the invoice value
of those SKYRC products which were immediately and directly involved in the event in
which the damage occurred.
(EU Version) via the built in switch-mode power supply.
INTRODUCTION