Skyrc Quattro B6AC Instruction Manual page 20

DISCHARGE OF NICD/NIMH BATTERY
DISCHARGE OF NICD/NIMH BATTERY
NIMH DISCHARGE
1.0A 11.5A
- + - +
DEC INC DEC INC
Batt type Start
'>3 seconds'
Stop Enter
NIMH 1.0A 7.42V
DSC 022:45 00890
Battery Elapsed Battery
type time voltage
Discharge Discharged
current capacity
CHARGE/DISCHARGE AND DISCHARGE/CHARGE
CYCLE OF NICD/NIMH BATTERY
NIMH CYCLE
DCHG>CHG 3
- + - +
DEC INC DEC INC
Batt type Start
'>3 seconds'
Stop Enter
NIMH 1.0A 7.42V
D>C 022:45 00890
Battery Elapsed Battery
type time voltage
Discharge Discharged
or charge or charged
current capacity
DCHG 1 1314mAh
CHG 1 1430mAh
Set charge current on the left and the final voltage on the right.
Range of the charge current is 0.1-1.0A; range of final voltage is
0.1-25.0V. Press START/ENTER key for more than 3 seconds to
start the program.
The screen indicates the discharging state. You can press
START/ENTER key to alter discharge current. Press
START/ENTER again to store the value. Press BATT TYPE/STOP
key to stop discharging. The emitted sound alerts the end of
discharging.
You can set up the sequence on the left and the number of cycles
on the right. The range of the cycle number is 1-5.
Press BATT TYPE/STOP key to stop program, you can press
START/ENTER key to alter charge current. The sound indicates
the end of program.
When it approaches to the end, you can see the capacity of the
battery being charged or discharged. You can press INC or DEC
key to display result of each cycle.