Page 1
Color profile: _DEFAULT.CCM - Generic Profile Composite World-Class Auto Security D:\corel\DRAW\COVERS\Cov-cyber9.cdr Tuesday, June 15, 1999 4:59:15 PM...
Page 2
All Clifford sys tems are cov ered by one or more of the fol low ing Clif ford Elec tron ics pat ents: 4,158,874; 4,233,642; 4,327,444; 4,383,242; 4,430,685; 4,845,464; 4,887,064; 4,890,108; 4,922,224; 4,997,053; 5,081,667; 5,146,215; 5,157,375 and other pat ents...
Ta ble of Con tents Stan dard Fea tures of the Cy ber 9 ....3 Wel come ....... . . 9 Your 4- button/12- channel re mote con trols .
Page 4
Ta ble of Con tents How to in ter pret the LED status in di ca tor ....16 Auto mat ic Battery- Saving Mode ..... . 16 AutoLock and Aut oUn Lock™...
UltraSecure Coded Valet Mode™ your Cyber 9 like they can all other brands of alarms. Re mote Con trolled Valet Mode En try and Exit button on your remote control from up to 100 feet away, you can enter or exit valet mode.
Page 6
Long- Term Chirp Si lenc ing chirps until you choose to reactivate them. Remote Controlled Courtesy Lighting convenience, when you remotely disarm your Cyber 9, the interior lights turn on and stay on until you start the engine or 30 seconds, whichever occurs first.
Page 7
Patented Smart AutoTesting™ sensors every time you remotely arm and warns you if you accidentally arm your Cyber 9 system with the hood or trunk open. If there is a genuine trigger or sensor malfunction, the system will specifically identify the problem, thereby eliminating time-consuming and costly trouble-shooting.
Page 8
Cyber 9, a special chirp and parking light flash sequence will audibly and visually alert you from a distance if an intrusion attempt was foiled while you were away. Your Cyber 9 will even identify the specific trigger or sensor that detected the intrusion attempt.
Page 9
Stan dard Fea tures of the Cy ber 9 Enhanced User-Selectable AutoArming™ “passively” if you forget. May qualify you for an insurance discount that could pay for the system (consult your insurance company). AutoArming En able/Dis able AutoArming with just a few flicks of a switch. —...
Page 10
Stan dard Fea tures of the Cy ber 9 (cont.) High-Luminescence LED Status Indicator with Automatic Battery-Saving — Adds visual deterrence and identifies system status. To conserve Mode vehicle battery power, if the system has remained continuously armed for 48 hours, the flash rate will automatically slow to half the normal rate. If left continuously armed for 96 hours, the blink rate will slow to one-quarter the normal rate.
Clifford’s unique PlainView Coded Valet Switch ensures that no thief can turn off your Cyber 9 like the can with all other car alarm brands. For total freedom from incorrectly adjusted sensors, there’s remote controlled adjustment of the system’s dual-zone piezo sensor that...
Your 4-button/12-channel remote controls The 4-button/12-channel remote controls are ultra-sophisticated miniature radio transmitters powered by a tiny 12-volt battery. Range is up to 100 feet. A weak remote control battery will reduce range. Electrical interference and even sunspots can interrupt the signal from your remote control to the system.
What each button/channel does Your Cyber 9 remote controls come pre-programmed so that certain channels command certain functions. If you wish, you can actually assign any channel except 9 through 12 to any function (see pages 20-24). The following chart indicates what each remote control channel number does, and how to transmit each channel number.
IntelliStart remote engine starter, remote power ALARM STATE ..window control, electric garage door and entry gate opener(s), Cyber 9 systems on your other vehicles, etc. Channels 9, 11 and 12 control remote valet mode entry/exit (see What about...
Thus the code recorded and played back by the thief’s code-grabber will never be accepted by your Cyber 9. Only ACG can make a car alarm impervious to code-grabbing, and only Clifford systems have ACG with Random Code Encryption.
Ul traSe cure™ Coded Valet Mode Your secret valet code In seconds, thieves can disable all other alarm brands by hotwiring the ignition and flicking an easy to find “hidden” valet switch. Your system has safeguards that absolutely ensure a thief cannot enable the valet mode as a way of “turning off” your system. How? To enable valet mode, the driver must first enter a secret valet code on the PlainView switch.
3. You now have 5 seconds to press the latched position to enter valet mode. The system’s LED will glow continually for on-going visual confirmation of valet mode. To exit valet mode 1. Turn the ignition switch to its “ON” position or start the engine. 2.
User-selectable features on pages 20-24.) Selectable starter/ignition interrupt At the time of installation, you can select whether your Cyber 9 interrupts the starter line or the ignition line. To verify which line is electronically interrupted, enter the vehicle, close the doors, arm the system while inside the vehicle, then try to start the engine. If the engine cranks but does not start, the ignition is bypassed.
An improperly adjusted sensor is the most common cause of false alarms. With other alarms, this requires repeated trips back to the dealer. Not so with Cyber 9. You can adjust sensitivity electronically without tools and without even knowing where the sensor is mounted! If the setting(s) of the Piezo Sensor is either too sensitive or not sensitive enough, you may individually test and adjust the settings of each zone.
have factory-delayed courtesy lights). If a sensor is malfunctioning, you will receive the usual 2 chirps and 2 flashes, then, 10 seconds later, there will be 4 chirps and 4 flashes. NOTE: Since this is a warn ing in di ca tion, you will hear the 4 chirps even if you have the chirp mut ing fea ture turned on.
All the siren electronics are in the system control unit rather than the siren itself. This protects them from heat, dirt and exposure to the elements (other alarm companies’ sirens are far more susceptible to failure). Your Cyber 9 also provides these additional features: Whenever you wish, you may silence your Cyber 9’s...
Once you’ve changed a few settings, you’ll find that programming Cyber 9 is so easy that you can even do it while driving! The system comes with all of its features pre-programmed as noted by the bold type in the Table of user-selectable features on pages 23-24.
c. To exit program mode, turn the ignition off (you’ll hear 3 chirps and the LED will turn off to indicate exit of program mode). If driving, just wait 60 seconds and the system will automatically exit program mode. EX AM PLE 1: Turn on AutoArm & Lock: You can set the system to automatically lock the car doors when the system AutoArms (see page 21).
Clifford Dealer and program them into the system yourself. Each Cyber 9 will respond to as many as four 12-channel remote controls. To add a new remote control to the system, use the procedures noted in the User-selectable features section on pages 20-24.
Ta ble of user- selectable fea tures: 1 chirp = OFF, two chirps = ON. Fea ture Se lect Row 1 Add new re mote to chan nel 1 1st mo men tary info on page 11 NOTE 1 Row 2 Add new re mote to chan nel 2 2nd mo men tary info on page 11 NOTE 2...