Thermo Scientific DSP2 Installation And Operation Manual page 38

Path: Product (Hard Key)/Product Library
Individual product records which can store information such as sensitivity settings, reject parameters, etc. can be created. Since
most parameters will be shared by all the products it is preferable to set one product record completely including all the reject
parameters and then copy this product to a new product number. Then any individual parameter can be adjusted for this
specific record.
Copy
This menu allows you to copy from the currently running product to a new product number. Press the Plus or Minus keys to
select the new product number, then press copy. The menu will then change to Edit Product Name, press the Plus and Minus
keys to select the first character in the desired name (range A-Z and 0-9). Use the cursor left or right keys to move to the desired
character slot and repeat process until the desired name is complete. Press Accept when name is complete. You have now
copied all the parameters from the running product to the new product memory position. If you wish to run the new product,
press and release the Product hard key until the desired product name and number appears then press the Run It option. Now
you can edit or modify the desired parameters such as sensitivity etc. for that specific product record. It is always advisable to
make a backup copy even if only one product record is required.
Delete
This allows individual product records to be deleted. Press Plus and/or Minus to select the desired record to be erased and then
press Delete.
NOTE:
•
The Prime Product 1 cannot be deleted.
•
The running product cannot be deleted.
Edit Name
This menu allows you to edit the name of the current running product.
Erase All Products
This menu allows you to erase the detector's entire memory.
WARNING: All learned and programmed parameters will be erased.
Product Selection
Selection of a new product from the already stored product records is achieved by pressing the Product hard key. Press and
release until the desired product appears, then select Run It. That product record will now be loaded and will become the
running product.
Product Library
34