Service Data - Thermo Scientific DSP2 Installation And Operation Manual

Service Data

This menu displays service and troubleshooting information.
FREQUENCY
This displays the frequency of the control panel. Example: 300Khz.
LEVELS
This represents a volt meter display of the search head signals. Three signals can be monitored here: the balance, the oscillator
reference signal A and oscillator reference signal B. Refer to the Fault Finding section of this manual.
VERSION
This displays the version of software this panel is using. The version number should match the version number on the front of
this manual.
SCOPE
The scope display can be used to show various wave forms. Refer to the Fault Finding section in this manual.
39