Important Information - Uniden XDECT 8115 Series Owner's Manual

IMPORTANT INFORMATION

Solving Problems
General Problems
No handsets can make or
receive calls.
A handset can't make or
receive calls.
A handset can make calls,
but it won't ring.
A handset is not working.
The phone keeps ringing
when I answer on an
extension.
Audio Issues
Callers sound weak or
soft.
There's a lot of noise or
static on the line
Caller ID Problems
No handsets display Caller
ID information.
Possible Solutions
Check the telephone cord connection.
Disconnect the base AC adapter for a few
minutes; then reconnect it.
Move the handset closer to the base.
Make sure the ringer is turned on.
Make sure DND mode is turned off.
Charge the battery for 15-20 hours.
Check the battery connection.
You may have to change the line mode.
Contact Customer Service for instructions.
Possible Solutions
Move the handset closer to the base.
Keep the handset's battery fully charged.
Increase the earpiece volume.
Check for interference from appliances
(microwave ovens, TVs, etc.) or wireless
devices (baby monitors, WiFi equipment,
etc.). Move the handset or base away from
the interference source.
If you use a telecoil hearing aid, turn on
T-coil mode (see page 16).
If you have any service that uses the phone
line, add a DSL or telephone line filter (see
page 36).
Possible Solutions
Let calls ring twice before answering.
Make sure your Caller ID service is active.
33