Installing Your Phone; Charge The Battery - Uniden XDECT 8115 Series Owner's Manual

INSTALLING YOUR PHONE

Charge the Battery

1) Unpack all handsets, battery packs,
and battery covers. If any battery
cover is already on the handset, press
in on the notch and slide the cover
down and off.
2) Line up the red and black wires on the
battery pack with the label inside the
handset.
3) Push the connector in until it clicks
into place; tug gently on the wires to
make sure the battery pack is securely
connected.
4) Place the cover over the battery
compartment and slide it up into
place.
5) Connect the base AC adaptor to the
ADAPTER jack on the rear of the base.
6) If you have accessory handsets, connect a
charger AC adaptor to each charger's DC
IN 9V jack and set the plug into the notch as
shown.
7) Plug the other end of each adaptor into a
standard 240V AC power outlet.
6
Red
Black