Connect The Telephone Cord - Uniden XDECT 8115 Series Owner's Manual

8) Place a handset in the base and any accessory
handset(s) in the charger(s) with the display(s) facing
forward. The CHARGE light on the handset(s) should
turn on.
If...
the CHARGE light
does not turn on
Charge all handsets completely (about 15 hours) before using them.

Connect the Telephone Cord

Use the telephone cord to connect the TEL LINE
jack to a standard telephone wall jack.
Test the Connection
1) Pick up the handset from the cradle and press HOME/FLASH. You
should hear a dial tone, and the display should say Talk.
If...
you don't hear a dial
tone or the display
says Check Tel Line
2) Make a quick test call. (Press END/CLEAR to hang up.)
If...
there's a lot of
noise or static
3) Test any accessory handsets the same way. If you can't get a dial
tone or the handset display says Unavailable, try moving the handset
closer to the base or resetting it (see page 36). Charge all handsets
completely (about 15-20 hours) before using them.
Try...
- reseating the handset
- checking the AC adaptor connection
- seeing if the outlet is controlled by a
wall switch
Try...
checking the connection between the
base and the phone jack.
Try...
see page 33 for tips on avoiding
interference.
7