Marquis Spas THE QUEST Operating And Troubleshooting Manual page 8

PAGE 34
MARQUIS SPAS
spa control operation
HEAT MODE
Your spa comes preset in the standard heat mode. For
most applications, the standard mode should be used. If
you are in a warm weather climate and the spa does not
require as much heat, the economy mode may work
best. For a vacation home or for very infrequent use, the
sleep mode provides filtration and circulation with lower
energy demand. In economy mode your spa heats only
during the filter cycle. In sleep mode your spa will main-
tain a water temperature that is 20°F (7°C) below the set
temperature. This ensures your spa will be ready to use
more quickly (allow about one hour per one degree F for
heating your spa's water) when increasing the tempera-
ture to the desired level.
The spa's heat mode can be adjusted to one of three
different settings:
Standard Mode
The spa water heats as necessary to maintain the set
temperature. "Standard" will display until the mode is
changes.
NOTE: The last measured temperature displayed is
current only when Pump 1 has been running for at
least two minutes.
Economy Mode
In this mode the spa only heats to the set temperature
during a filter cycle. The "Economy" icon will display
until the mode is changed. Press the JETS 1 pad to put
the spa in "Standard-in-Economy" mode which
operates the same as Standard mode (both Economy
and Standard will display). The spa reverts to Economy
mode automatically after one hour.
Sleep Mode
The spa water heats to within 20°F (7°C) of the set
temperature only during filter cycles. "Sleep" will
display until the mode is changed.
To Adjust Heat Mode
First press the Settings pad. The current heat mode will
start flashing. Use the Temp- pad to scroll through the
modes. When desired mode is displayed touch the
Settings pad again to lock the mode.
Panel Lock
Press TEMP+ or TEMP- pad followed by QUIET SOAK
pad to lock. Then press TEMP+ or TEMP- pad followed
by QUIET SOAK pad to unlock.
• Lock feature locks all user settings: time, filter cycles,
modes, Smart Clean and temperature settings.
• Lock feature does not lock Jets 1, Jets 2, Timer,
Spa Light, Waterfall Light, Quiet Soak, or Clock.
• Secured LED will illuminate when system is locked.