Table of Contents
Advertisement
PAGE 47
MARQUIS SPAS
marquis care and enjoyment guide
IMPORTANT CHEMICAL SAFETY PROCEDURES
1
Always keep chemicals out of reach of children.
2. Read product labels carefully prior to use.
3. When dissolving, always add chemicals to water,
do not add water to chemicals. Some dry chemi-
cals should be dissolved prior to adding them to
the spa. Using a clean container, dip some water
from the spa. Mix until dissolved, then add to
circulating water. NOTE: Broadcasting dry chemi-
cals into the spa water may cause damage to
surrounding surfaces.
4. CAUTION: Do not add chemicals together. Add
them separately to the spa water.
5. All chemical products should be stored in a cool,
dry, well-ventilated area where the average
temperature does not exceed 90° F (32°C). Keep
storage area clean of debris such as rags, news-
paper, and combustible materials.
6. Keep chemicals away from open flame or other
heat source. Do not smoke near chemicals. If a
dry chlorine chemical fire should occur, use water
only. Do not use a dry chemical fire extinguisher to
attempt to put out the fire.
7. When adding chemicals, always keep the water
circulating in the spa with jets in a downward
circular pattern for better chemical distribution.
Add chemicals to the spa water one at a time.
Allow several minutes between any new chemical
additions using the jet action to evenly distribute
throughout the spa.
8. Wait approximately 15 minutes after adding
chemicals to retest your water for an accurate
reading. Retest your spa water before using.
9. If you have any questions or concerns about the
correct procedures for handling chemicals, please
contact your spa dealer or Marquis Spas.
Hide quick links:
Advertisement
Table of Contents
