Table of Contents
Advertisement
Marquis Ozonator
reduces the need for
chemical sanitizers.
PAGE 36
MARQUIS SPAS
spa control operation
Quiet Soak
Press the QUIET SOAK pad to enter the soak mode.
All automatic functions related to the pumps are
disabled (i.e., filter cycles, smart clean cycles). If either
pump 1 or pump 2 are operating, they will be turned
off. Soak mode lasts for 30 minutes then the spa
returns to normal operation. All button functions
operate as normal while in a Soak mode. When in a
Soak Mode, the Soak LED will illuminate.
Maintenance Reminders
• Check Bromine LED will illuminate every 21 days.
rSA will be displayed in the LCD window.
• Clean Filter LED will illuminate every 30 days.
rCL will be displayed in the LCD window.
• Change Water LED will illuminate every 90 days.
rCH will be displayed in the LCD window.
• Change Minerals LED will illuminate every 90 days.
rCA will be displayed in the LCD window.
JETS
Use JETS 1 pad on either bather's panel or remote
control. First press JETS 1 pad to activate pumps on
low-speed. Second press of JETS 1 pad activates
pumps on high-speed. Third press of JETS 1 pad
turns jets off for all-quiet soak setting. Fourth press of
JETS 1 pad returns pumps to low-speed. Repeat
above procedure for JETS 2.
Pump 1: Destiny, Reward, Epic
• High-speed run timeout: 15 minutes
• Low-speed run timeout: 15 minutes (if not in filter
cycle or SmartClean).
• Pump 1 icon will be shown in lower left corner of
the display. It spins slowly when on low-speed,
and spins fast when on high-speed.
Pump 2: Destiny, Reward, Epic
• High-speed run timeout: 15 minutes
• Low-speed run timeout: 15 minutes (if not in filter
cycle or SmartClean).
• Pump 2 icon will be shown in lower left corner of
the display. It spins slowly when on low-speed,
and spins fast when on high-speed.
Hide quick links:
Advertisement
Table of Contents
