Table of Contents
Advertisement
PAGE 63
MARQUIS SPAS
maintenance
4. Clean the DuraShell
Once the spa is drained, clean the DuraShell interior
thoroughly – especially at the water line. We suggest
the Glove Sponge to clean without scratching.
Clorox bleach (diluted) is the only approved
cleaning agent for DuraShell – any other prod-
ucts should be avoided.
NOTE: Due to the high-gloss, fine finish of the
acrylics, imperfections in the surface texture
may occur. These in no way compromise the
integrity of the spa shell.
NOTE: Do not leave an empty spa uncov-
ered. Direct sunlight on the spa surface can
cause severe damage or blemishing and can
result in the voiding of any surface warranties.
5. Refill the Spa
Fill the spa with fresh water from a garden hose
and balance the water as described in the Water
Treatment section.
The use of a Fill Filter is recommended when filling
especially in areas of high mineral content in the
water. Attach to the end of a garden hose to filter
out any grit and sediment that could accumulate in
the spa and potentially scratch the spa surface.
®
Interior
Hide quick links:
Advertisement
Table of Contents
