Texas Instruments TI-89 Titanium User Manual page 513

Scrolling through the Editor
To move the cursor:
One cell at a time
One page at a time
Go to row 1 in the current column or to the
last row that contains data for any column
on the screen, respectively. If the cursor is
in or past that last row,
999.
Go to column 1 or to the last column that
contains data, respectively. If the cursor is
in or past that last column,
column 99.
To enter a value from the entry line, you can also use D or C.
Note:
When you scroll down/up, the header row remains at the top of the screen so that the
column numbers are always visible. When you scroll right/left, the row numbers remain
on the left side of the screen so that they are always visible.
How Rows and Columns Are Filled Automatically
When you enter a value in a cell, the cursor moves to the next cell. However, you can
move the cursor to any cell and enter a value. If you leave gaps between cells, your
device handles the gaps automatically.
Data/Matrix Editor
8 D
goes to row
8 B
goes to
Press:
D C B A
, , , or
2 D C
and then ,
8 C
or
8 D
8 A
or
8 B
B A
, , or
510