Texas Instruments TI-89 Titanium User Manual page 349

Standard values (set when you select
nmin = 1.
xmin =
nmax = 10.
xmax = 10.
plotstrt = 1.
xscl = 1.
plotstep = 1.
You may need to change the standard values for the n and plot variables to ensure that
sufficient points are plotted.
To see how
plotstrt
sequence.
This graph is plotted beginning with the 1st term.
This graph is plotted beginning with the 9th term.
Both of these graphs use the same Window variables, except for
Note:
Sequence Graphing
L 10. ymin =
ymax = 10.
yscl = 1.
affects graph, look at the following examples of a recursive
from the „
6:ZoomStd
L 10.
plotStrt=1
plotStrt=9
toolbar menu) are:
Zoom
.
plotstrt
346