Texas Instruments TI-89 Titanium User Manual page 494

Split Screens
Setting and Exiting the Split Screen Mode
To set up a split screen, use the MODE dialog box to specify the applicable mode
settings. After you set up the split screen, it remains in effect until you change it.
Setting the Split Screen Mode
1. Press 3 to display the
2. Because the modes related to split screens are listed on the second page of the
dialog box, either:
MODE
Use D to scroll down.
•
— or —
Press „ to display
•
3. Set the
Split Screen
to change a mode setting, refer to Operating the Calculator.
Split Screen Settings
TOP-BOTTOM
LEFT-RIGHT
Split Screens
dialog box.
MODE
.
Page 2
mode to either of the following settings. For the procedure used
491