Diagnostic Tests - GE Profile WPDH8800J Technical Support

The following tables show the diagnostic tests and the button sequence that is required to perform them.
Service Mode Test
Configure UI
t01
t02
t03 Version Info
t04 Vibration
Test
t05 EEProm Test
CONFIDENTIAL AND PROPRIETARY INFORMATION-NOT FOR PUBLIC DISCLOSURE. September 2008

Diagnostic Tests

Enter Displays "configure UI"
Power Returns to service mode screen
Displays error codes
Enter
Clears highlighted error code from machine
Start/
Pause
Returns to service mode screen
Power
Enter Displays the current version of software
Returns to service mode screen
Power
Spins up to 1300 rpm; then goes back to service mode screen
Enter
Power Interrupts and returns to service mode
Displays "test in progress" for a while; then displays UI Memory status
Displays PB status
Returns to service mode screen
Sequence
55