GE Profile WPDH8800J Technical Support page 52

Service Test Mode (cont.)
Test Mode
t01 Configure UI (User
Interface)
t02 Error Codes
t03 Version Information
t04 Vibration Test
t05 EEPROM Test
t06 UI Test
t07 Key Continuity
CONFIDENTIAL AND PROPRIETARY INFORMATION-NOT FOR PUBLIC DISCLOSURE. September 2008
Allows changing the configuration of the control for
different models.
Checks for any error codes reported by the controls.
Checks the software version.
Tests the washer vibration by spinning to the extra
high spin speed as fast as possible. Note: No out
of balance detection will be performed here, so the
washer will spin up regardless of the out of balance
that is placed in the drum.
Checks the memory on the user interface control
board, then the memory on the Power Board.
Verifies all LEDs operate correctly.
Verifi es that each key operates correctly.
Description
52