GE Profile WPDH8800J Technical Support page 59

Service Mode Test
t16 Bulk Pumps
Test
Bulk Sensors
t17
Test
t18 Auto Spin
Profile
t19 Bulk
Manual
Priming
CONFIDENTIAL AND PROPRIETARY INFORMATION-NOT FOR PUBLIC DISCLOSURE. September 2008
Diagnostic Tests (cont.)
Displays "left detergent pump"; water fills and primes left detergent
Enter
Displays "softener pump" and begins priming
Start
Displays "right det pump" and begins priming
Start
Continues cycling through the bulk pumps
Start
Drains and returns to service mode screen
Power
Displays the status of Left Detergent, Softener and Right Detergent
Enter
Returns to service mode screen
Power
Slowly ramps up to 90, then 120, then 410
Enter
Interrupts and returns to service mode screen
Power
Displays "prime left detergent," "prime softener," prime right detergent"
Enter
with one highlighted
Begins priming selected, with water on to rinse it from dispenser
Enter
drawer
Drains; then returns to service mode screen
Power
Sequence
59