GE Profile WPDH8800J Technical Support page 64

Error Code Description
E10 Motor Communication
Communication
Problem Between
Interface
Machine Control and
Motor Drive
E11 Door Lock Door Lock Assembly
E12 Door Unlock Problems
E13 Door Open
E28 Unexpected
Door Unlock
Detected
CONFIDENTIAL AND PROPRIETARY INFORMATION-NOT FOR PUBLIC DISCLOSURE. September 2008
Error Codes (cont.)
Action
•Check integrity of wiring and connections between main
control and motor drive.
•Clear error code and run a cycle.
•If fault persists and reappears, replace the Machine Control.
•Check integrity of wiring and connections between main
control and Door Lock mechanism.
•Investigate Door Lock mechanism; check door microswitch
operation, lock and unlock solenoid continuity and contact
integrity; replace Door Lock mechanism if necessary.
•IF ABOVE STEPS DO NOT CLEAR THE PROBLEM:
•Replace the main control.
64