Remote Controller - Hitachi EP-A3000 Instruction Manual

Operation Buttons and Indicators /
Auto Mode
The indicator is lit green when
the Auto Mode is running.
Timer
The indicator is lit green
when the 2-hour timer is set.
Point the remote controller at the infrared receiver on the purifi er when you operate.
The remote controllable distance is approx. 6m maximum when pointing the remote controller squarely to the receiver.
On/Off Button
Press this button to start or
stop operation.
Mode Button
Press this button to switch the
mode in automatic operations.
Max button
Press this button to start max
operation.
Note
Filter
Housed inside the purifi er.
∗
Be sure to remove this
fi lter from plastic bag
before operating the
purifi er.
EP-A3000.indd 3
P.E-OO
shows a page with further description.
Operation Buttons and Indicators
P.E-9 Airflow Level
Indicates airflow rate during operation.
Silent
(Green)
P.E-10 Infrared Remote Receiver
Direct the remote controller at this
location before pressing buttons.

Remote Controller

P.E-8
P.E-9
P.E-10
The remote control may not work in a room where inverter lighting apparatus or electronic quick start
lighting apparatus is used, or when the infrared receiver is exposed to direct sunlight.
If you operate the remote controller not pointing straight to the front face of the purifi er, the sensitivity
will be reduced. Operate the controller from the place in front of the purifi er whenever possible.
Provided Accessories
(x1)
On/Off Button
P.E-9
Use this button to start and stop
operation, and to switch the
operation mode and airfl ow rate.
Med Max
(Green) (Green)
Detects air contamination
such as cigarette smell.
Press this button to switch
airflow rate.
Press this button to set Off-
timer.
Remote controller
(x1)
P.E-11
Odor Sensor P.E-11
Airflow Button P.E-9
Timer Button P.E-10
"AAA" R03
batteries for remote controller
(x2)
11/18/2011 8:40:40 AM
E-3