Switching Airfl Ow Rate - Hitachi EP-A6000 Instruction Manual

Using Remote Controller
Airflow rate
When "Auto" is lit, the following airflow rate is used according to the selected operation mode.
The airflow rate indicators from "Silent" to "Max" are not lit.
Mode
Air Purify
Silent
Pollen
Silent
Strong Deodorization
When humidity level indicates 60% or higher
Humidify
Silent
When humidity level indicates 70% or higher
Skin Moisturize
Silent
According to the level of air contamination and humidity detected by the odor sensor, dust sensor and humidity
sensor, airflow rate is automatically switched to an appropriate level.
Note
So far as the water tank and water tray are filled with water, humidifying function works in any of "Air Purify",
"Pollen" and "Strong Deodorization" modes. If you do not want humidifying function, drain the water tank,
water tray and humidifying filter.
You can select a desired airflow rate from the four different levels.
E-12
Airflow Range
Low Medium
Low
Medium
Low Medium
Low
Medium
Low
Medium
Switching Airflow Rate
Press button.
Airflow rate switches every
time you press this button.
(Continued)
High
High Max
High
High
Airflow level indicator comes on.
Air Purify
Pollen
Auto
Airflow rate changes in the following sequence.
Auto
Silent
Strong Skin
Deodorization Humidify Moisturize
On
Max(Blinking)
Medium High Blinking
(Max)