Tonneau Cover (If Equipped) - Maxum Sport Deck Owner's Manual Supplement

Installing the Canvas
1. Slide the end eyes of the main bow (A) into the deck hinges and insert the
securing pins.
2. Raise the main bow and slide the end eyes of the aft supports (B) into the deck
hinges and insert the securing pins.
3. Pull the secondary bow (C) forward and slide the forward brace (D) windshield
hinges over the windshield frame and insert securing pins.
4. Install the port stern support (D). To determine which end of the support goes
up, lay the support on a flat surface. The end eye that is parallel to the flat sur-
face goes up.
5. No adjustments to the jaw slides should be needed as they are preset during
manufacturing. Before attempting to adjust the jawslide positions, obtain the
correct measurements from your selling dealer.

Tonneau Cover (if equipped)

A tonneau cover is available for your boat. To attach the cover, start at the front.
The Tonneau cover can be attached with the canvas top in the arch position.
CANVAS TOP FOLDED IN ARCH POSITION
WITH TONNEAU COVER INSTALLED
CHAPTER 2: FEATURES / SYSTEMS
Sport Deck • Owner's Manual Supplement
29