To access the motor and all other components, it is nec-
essary to remove the hopper, front and back covers.
Removing Cover
1. Completely
remove 6
screws (2 on
top and each
side) from
cover.
2. Lift cover up
and then tilt it
back and off
sprayer frame.
310717E
Back Cover
Replacing Cover
1. To reposition
ti4430a
2. Replace and
ti4431a
Removing and Replacing Hopper, Front and Back Covers
cover on sprayer
frame, tip the
cover back, toward
you and slide it
down, into place in
the base of the
frame. Then push
the top back into
place. Align screw
holes in side and
top of cover with
holes in frame.
tighten screws.
ti4432a
ti4432a
9