Removing and Replacing Hopper, Front and Back Covers
Back Cover
To access the motor and all other components, it is nec-
essary to remove the hopper, front and back covers.
Removing Cover
1. Completely
remove 6
screws (2 on
top and each
side) from
cover.
2. Lift cover up
and then tilt it
back and off
sprayer frame.
10
ti4430a
ti4431a
Replacing Cover
1. To reposition
cover on sprayer
frame, tip the
cover back, toward
you and slide it
down, into place in
the base of the
frame. Then push
the top back into
place. Align screw
holes in side and
top of cover with
holes in frame.
2. Replace and
tighten screws.
ti4432a
ti4433a
310645L