Install The Fabric Cover - Graco PRO 5500hc Instructions Manual

Install the Fabric Cover (See Fig. 11)
1. Install the fabric cover (XX) over the front of the
gun and slide it back to cover the exposed tubing
and hoses at the back of the manifold.
YY
Fig. 11
Installation
XX
03445
2. Route the exhaust tube (YY) outside the cover.
This enables you to monitor the exhaust tube for
the presence of any paint or solvent. See Check
for Fluid Leakage on page 22. Strap down the
exhaust tube to prevent it from moving around.
YY
Manifold Back View
03446