Welcome To Follett; Before You Begin; Important Cautions - Follett U300 Series Operation Manual

Welcome to Follett

Follett ice dispensers enjoy a well-deserved reputation for excellent performance, long-term reliability and
outstanding after-the-sale support. To ensure that this dispenser delivers that same degree of service, we ask
that you take a moment to review this manual before using the dispenser. Should you have any questions or
require technical help at any point, please call our technical service group at (800) 523-9361 or
(888) 2-FOLLETT or (610) 252-7301.

Before you begin

Check your paperwork to determine which model you have. Following is an explanation of the different model
numbers in the U300 series.
U300BR400A

Important cautions

!
•
Storage area of dispenser contains mechanical, moving parts. Keep hands and arms clear of this
area at all times. If access to this area is required, power to unit must be disconnected first.
• Follett manual load units accommodate most cube/cubelet ices up to 1" square and Follett
compressed nugget ice. Crushed, flake, bagged or congealed ice cannot be used. Use of these ices
can jam dispenser and void warranty. Separate any "waffle-like" sections of cubes before adding to
dispenser. If you have questions concerning your ice type, call Follett's customer service group at
(800) 523-9361 or (888) 2-FOLLETT or ( 610) 252-7301.
• Follett recommends use of an activated carbon filter for units equipped with icemakers.
• Ice is slippery. Maintain counters and floors around dispenser in a clean and ice-free condition.
• Ice is food. Follow cleaning instructions to maintain cleanliness of delivered ice.
Condenser type – A = air-cooled, W = water-cooled
Remote icemaker(s) capacity and refrigerant – 400 = 400 lbs (181kg)/day, R404A
B = integral beverage cooling. Absence of a B = no integral beverage cooling.
Approximate storage capacity in lbs
Configuration – U = undercounter single-sided, UD = undercounter dual-sided
2
800 = 800 lbs (363kg)/day, R404A
absence of = manual fill unit