FB, CT, and CI Dispensers Installation Instructions Technical Support If you experience any problems during the installation, please call Follett Technical Service toll-free at (877) 612-5086 for assistance. Description Follow these instructions to install the Maestro Plus ice machine module into your Symphony FB, CT, and CI dispenser.
Page 2
(1) GUIDE PLATE LEFT 25/50 01015767 (1) GUIDE PLATE LEFT 110 01042654 SCREW 204139 CT Dispensers (1) TOP MOUNT SPACER 01048578 (2) DRAIN ELBOW BARB FITTING 205624 (4) SCREW 208568 Maestro Plus P425/CP425/EP425 Ice Machine for Symphony FB, CT, and CI Dispensers...
Page 3
(2) 3/8" FLARE X 3/8" MNPT BRASS FITTING 00129486 (2) HOLE BUSHING 00105486 Tubes 110 FB/CT Drain tube 01055540 25/50/110CT Ice transport tube 25/50 FB/CT Drain tube 01055540 01055185 Maestro Plus P425/CP425/EP425 Ice Machine for Symphony FB, CT, and CI Dispensers...
60 min. time delay 20 min. time delay Flush enabled Flush disabled Maint. timer OFF Maint. timer ON Sleep cycle dispense duration 35 s 15 s 60 s Maestro Plus P425/CP425/EP425 Ice Machine for Symphony FB, CT, and CI Dispensers...
Page 5
Left (Fig. 4.1) and Right (Fig. 4.2) locating brackets 25/50 Units using screws from previous step. Note: Left side only uses 1 screw. 01015759 01015767 110 Units 01015759 01042654 Maestro Plus P425/CP425/EP425 Ice Machine for Symphony FB, CT, and CI Dispensers...
Page 6
8. 25/50 Units Only: Install gray plastic Fig. 5 spacer (Fig. 5.1) against rear of cabinet. 01069764 9. Slide supplied module into position Fig. 6 (Fig. 6). Maestro Plus P425/CP425/EP425 Ice Machine for Symphony FB, CT, and CI Dispensers...
Page 7
¼” shut off valve (Fig. 8). 01035526 12. Install supplied internal power cord Fig. 9 adapter (Twist-Lock) (Fig. 9). 01069772 Maestro Plus P425/CP425/EP425 Ice Machine for Symphony FB, CT, and CI Dispensers...
Page 8
(Fig. 10). 14. Install supplied internal bin signal cord Fig. 11 adapter (Twist-Lock) (Fig. 11). 01069772 15. Plug other end (Mate N Lock) into Fig. 12 electrical box (Fig. 12). Maestro Plus P425/CP425/EP425 Ice Machine for Symphony FB, CT, and CI Dispensers...
Page 9
160 F (71 C) hot water to soften (Fig. 13.1) and spread with pliers (Fig. 13.2). 17. Attach end of ice transport tube to Fig. 14 compression nozzle (Fig. 14). Maestro Plus P425/CP425/EP425 Ice Machine for Symphony FB, CT, and CI Dispensers...
Page 10
Note: Clamp must be oriented as shown in order for the insulation to be placed properly. 19. Install compression nozzle insulation (Fig. 15.2). 20. Install top bearing insulation (Fig. 15.3). Maestro Plus P425/CP425/EP425 Ice Machine for Symphony FB, CT, and CI Dispensers...
Page 11
00187211 00181388 01064567 22. Restore power and water to machine. 23. Sanitize machine prior to use. 24. Reinstall side panels, start up machine and check for proper operation. Maestro Plus P425/CP425/EP425 Ice Machine for Symphony FB, CT, and CI Dispensers...
Page 12
60 min. time delay 20 min. time delay Flush enabled Flush disabled Maint. timer OFF Maint. timer ON Sleep cycle dispense duration 35 s 15 s 60 s Maestro Plus P425/CP425/EP425 Ice Machine for Symphony FB, CT, and CI Dispensers...
Page 13
(Fig. 3). 01069764 It may be necessary to slightly bend up Fig. 4 the bracket located at the rear of the cabinet to ease installation (Fig. 4). Maestro Plus P425/CP425/EP425 Ice Machine for Symphony FB, CT, and CI Dispensers...
Page 14
8. Install spacer bracket (01048578) on Fig. 5 righthand side of machine with supplied screws (Fig. 5). 208568 9. Slide supplied module into position Fig. 6 (Fig. 6). Maestro Plus P425/CP425/EP425 Ice Machine for Symphony FB, CT, and CI Dispensers...
11. Route supplied ice transport hose Fig. 8 (01003532) down through hose clamp until it extends at least 1" into dispenser bin (Fig. 8). Tighten hose clamp to secure ice transport tube. Maestro Plus P425/CP425/EP425 Ice Machine for Symphony FB, CT, and CI Dispensers...
Page 16
160 F (71 C) hot water to soften (Fig. 9.1) and spread with pliers (Fig. 9.2). 13. Attach end of ice transport tube to Fig. 10 compression nozzle (Fig. 10). Maestro Plus P425/CP425/EP425 Ice Machine for Symphony FB, CT, and CI Dispensers...
Page 17
17. Install supplied drain tube onto drain Fig. 12 solenoid (Fig. 12.1) and evaporator drain pan (Fig. 12.2). Note: Use the long tube (01055540) for 110 models and the shorter tube (01055185) for 25/50 models. Maestro Plus P425/CP425/EP425 Ice Machine for Symphony FB, CT, and CI Dispensers...
Page 18
22. Cut compression fitting from end of Fig. 15 existing water tube. Connect existing water supply tube to attached solenoid water tube with supplied ¼” shut off valve (Fig. 15). 01035526 Maestro Plus P425/CP425/EP425 Ice Machine for Symphony FB, CT, and CI Dispensers...
Page 19
(Twist-Lock) (Fig. 16). 01069772 24. Plug other end (Mate N Lock) into Fig. 17 electrical box (Fig. 17). 25. Install supplied internal bin signal cord Fig. 18 adapter (Twist-Lock) (Fig. 18). 01069772 Maestro Plus P425/CP425/EP425 Ice Machine for Symphony FB, CT, and CI Dispensers...
Page 20
Note: Contact closure only, do not supply power. 27. Reinstall existing ice machine hold-down Fig. 20 bracket (Fig. 20). Note: Ensure that power cords are not pinched; route as shown in Fig. 20. Maestro Plus P425/CP425/EP425 Ice Machine for Symphony FB, CT, and CI Dispensers...
Page 21
(Fig. 21). 29. Restore power and water to machine. 30. Sanitize machine prior to use. 31. Reinstall side panels, start up machine and check for proper operation. 01064567 00129486 Maestro Plus P425/CP425/EP425 Ice Machine for Symphony FB, CT, and CI Dispensers...
Page 22
20 min. time delay 60 min. time delay Flush disabled Flush enabled Maint. timer OFF Maint. timer ON Sleep cycle dispense duration 35 s 15 s 60 s Maestro Plus P425/CP425/EP425 Ice Machine for Symphony FB, CT, and CI Dispensers...
Page 23
Remove Ice Machine Module Fig. 3 6. Remove two screws securing electrical box to condenser (Fig. 3). Cut wire tie from electrical cable bundle. 8. Install supplied funnel (Fig. 4). Fig. 4 Maestro Plus P425/CP425/EP425 Ice Machine for Symphony FB, CT, and CI Dispensers...
Page 24
Fig. 6 in cup of 160 F (71 C) hot water to soften (Fig. 6.1) and spread with pliers (Fig. 6.2). 11. Attach ice transport tube to evaporator Fig. 7 compression nozzle (Fig. 7). Maestro Plus P425/CP425/EP425 Ice Machine for Symphony FB, CT, and CI Dispensers...
Page 25
13. Install compression nozzle insulation (Fig. 8.2). 14. Install top bearing insulation (Fig. 8.3). 15. Attach module water tube to existing “T” Fig. 9 fitting (Fig. 9). Maestro Plus P425/CP425/EP425 Ice Machine for Symphony FB, CT, and CI Dispensers...
Page 26
16. Hang electrical box on dispenser Fig. 10 front and attach with supplied bracket (Fig. 10). 01012186 17. Install supplied internal power cord Fig. 11 adapter (Twist-Lock) (Fig. 11). 01069772 Maestro Plus P425/CP425/EP425 Ice Machine for Symphony FB, CT, and CI Dispensers...
Page 27
19. Plug two-pin bin thermostat cable into Fig. 13 electrical box (Fig. 13). 01069772 20. Connect other end to dispenser (Twist Fig. 14 Lock connection) (Fig. 14). 21. Push module fully into position. 01062306 Maestro Plus P425/CP425/EP425 Ice Machine for Symphony FB, CT, and CI Dispensers...
Page 28
23. Install supplied drain tube onto drain Fig. 16 solenoid (Fig. 16.1) and evaporator drain pan (Fig. 16.2). Ensure that drain stub is inserted into hole in ice machine base above drain cup (Fig. 16.3). 01062306 01062306 Maestro Plus P425/CP425/EP425 Ice Machine for Symphony FB, CT, and CI Dispensers...
Page 29
27. Start up machine and check for proper operation. Restore power and water to machine. 28. Sanitize machine prior to use. See appropriate Operation and Service manual shipped with the unit. Maestro Plus P425/CP425/EP425 Ice Machine for Symphony FB, CT, and CI Dispensers...
Page 30
Maestro Plus P425/CP425/EP425 Ice Machine for Symphony FB, CT, and CI Dispensers...
Page 31
Maestro Plus P425/CP425/EP425 Ice Machine for Symphony FB, CT, and CI Dispensers...