Basic Operation; General Maintenance - Moog THE SOURCE Owner's Manual

SECTION I
BASIC OPERATION
GENERAL MAINTENANCE
The components of the shipping carton for The Source should be saved in case short-distance transport is required.
Do not repack The Source without surrounding it with some kind of plastic (similar to the bag in which it was shipped).
Putting the instrument directly inside the styrofoam end pieces without any protection can generate harmful static changes
and may also damage the wood side pieces. A carrying case is recommended for long-distance transport.
The wood side and trim pieces are walnut. These should be periodically rubbed down with linseed oil
to maintain a rich finish.
The body of the instrument is constructed of brushed aluminum and, when needed, should be cleaned with a slightly damp
(not wet) cloth. The touch panel may be cleaned in the same manner, taking care not to let water accumulate on any surfaces.
The touch panel is highly resistant to all forms of damage except heat. Do not allow open flame or lighted cigarettes
near the touch panel.