Using The Arpeggiator - Moog THE SOURCE Owner's Manual

3. At the end of the last desired event, touch
(program 3).
To hear a recorded sequence, follow the sequence playback procedure. The sequence plays back at the last
sequencer rate entered.
To record the second sequence, follow the above procedure using
second sequence is controlled by MUWixmfM (program 6).
(program 2). Playback of the
USING THE ARPEGGIATOR
The arpeggiator can be thought of as a kind of "instant sequencer." It performs many of the functions
of the sequencer, but uses none of the sequencer memory.
To use the arpeggiator, proceed as follows:
VOLTAGE COIMTBOLJ-ED FILTER
KB TRACK
n [a] |7B
A - I I 0 ^ | | S ~l I ' R
LOUDNEBB CONTOUR
FOOTAGE WAVESHAPE
INTERVAL
OBCII.LATOR BANK
5161718
1. Touch B3SI3SSM'then touch program
displaying the arpeggiator playback rate.
(Arpeggio). The incremental display lights up,
2. Play the notes of the desired musical pattern one by one without repeating the first note played.
As keys are depressed, the display counts down from 24. The repetition of the first note will indicate
the end of the pattern and switch the arpeggiator to the playback mode.
17