Moog THE SOURCE Owner's Manual page 19

4. The Source is repeatedly playing Sequence 1. To change the playback rate, touch
in the modulation section, and adjust the sequencer rate with the incremental controller.
5. While the sequencer is playing, the incremental display "counts up." Other programs
may be selected and edited using editing techniques while the sequencer is running.
6. To stop the sequencer, touch ■■»«■«, then touch
from the last sequencer note played, touch
To restart from the beginning of the sequence, touch
To hear Sequence 2, follow the above procedure using
To record new sequences, follow this procedure:
PLAY 2
, then
(program 6).
To continue
l(program 4).
<Pr°9ram 5).
The last playback rate
chosen will be held
in memory when the
sequencer is stopped;
subsequent sequences
will start at this rate.
VOLTAQ6 CONTROLLED FILTER
KB TRACK
A ^J I' 0^1 |_ S I 1 H
LOUONE8B CONTOUR
1. Touch U3BHJ5I'tnen ':<a— (program 1). The incremental display shows 88,
the number of recordable events.
2. The sequencer will begin recording with the depression of the first key. The display
counts down, continuously displaying the number of events left.
Rests, or spaces between
notes, are counted as
events. For efficient
sequencer use, see
Digital Functions on
page 41.
16