Error Code List - Acroprint ES700 Service Manual

10. ERROR CODE LIST

No Error Symptoms
E-00
CPU does not function properly.
Program is corrupted or CPU is broken.
E-01 Memory retention is not possible.
E-05 No-card detection occurs before printing in the
automatic or semi-automatic printing modes.
E-30 Print Head does not return to the home position.
Home position sensor is not shaded after the
Print Head home position initial operation or
after printing of the card.
E-38 There is an anomaly in the CR motor or CR
encoder sensor.
Encoder does not pulse within 1 sec. after the
CR motor begins to operate or within 15.3 msec.
during operation.
E-40 Wrong password is entered.
E-41
Daylight saving time setting is incorrect.
E-49 An impractical setting is made.
1. Press the reset switch and check the CPU for proper
operation.
1. Make sure the Lithium Battery is properly installed.
2. Make sure JP2 of the Control PCB Ass'y is properly
installed.
3. Make sure the voltage of the Lithium Battery is not
lowered.
1. Press the card on the Paper Sensor until time is printed.
1. Make sure the home position sensor is installed in
the proper position.
2. Check the CR encoder sensor for proper function.
3. Make sure gears in the CR motor system are properly
engaged and the Print Head properly moves.
1. Check the CR encoder sensor for proper operation.
2. Make sure the CR motor can run.
3. Make sure the CR motor system gears meshed.
4. Check the CR encoder sensor for proper placement.
1. Enter the correct password that has been input in the
password setting.
1. Change the setting being care not to input the same
month and day for when daylight saving time starts
and ends.
1. Make the setting within the practical range.
10-1
Remedies