1998 Expedition/Navigator Workshop Manual
C10 CHECK CIRCUIT 682 (DB) FOR OPEN
GEM C239
C11 CHECK CIRCUIT 682 (DB) FOR SHORT TO POWER
C12 CHECK BPP SWITCH PID BOO_GEM
http://www.fordtechservice.dealerconnection.com/pubs/content/~WSWJ/~MUS~LEN/21/...
Measure the voltage between GEM C241-8, circuit 780 (DB), and ground.
Is any voltage indicated?
Yes
REPAIR circuit 780 (DB). CLEAR the DTCs. TEST the system for normal operation.
No
GO to C10.
Measure the resistance between mode switch C230-2, circuit 682 (DB), and GEM C239-21, circuit 682 (DB).
Is the resistance less than 5 ohms?
Yes
GO to C11.
No
REPAIR circuit 682 (DB). CLEAR the DTCs. TEST the system for normal operation.
Measure the voltage between GEM C239-21, circuit 682 (DB), and ground.
Is any voltage indicated?
Yes
REPAIR circuit 682 (DB). CLEAR the DTCs. TEST the system for normal operation.
No
REPLACE the GEM; REFER to
Section
419-10. CLEAR the DTCs. TEST the system for normal operation.
Page 41 of 64
8/30/2010