Tv Back Panel Connections - Toshiba 26HL37 Owner's Manual

267470726HL37_EN.book Page 9 Friday, July 6, 2007 7:44 PM

TV back panel connections

For an explanation of cable types and connections, see Chapter 2 (- page 10).
1
2
3 4
®
1 ColorStream HD-1 and ColorStream
Two sets of ColorStream
video inputs (with standard analog audio inputs) for
connecting devices with component video output, such as
a Toshiba DVD player with ColorStream
Note: Component video cables carry only video
information; separate audio cables are required for a
complete connection.
2 Fixed Audio OUT — Analog audio outputs for
connecting an audio amplifier.
3 PC/HDMI-1 (AUDIO) IN — PC audio input terminals
are shared with HDMI1 analog audio input terminals, and
their use can be configured in the Set Up menu
(- page 42).
4 VIDEO-1 IN — Standard (composite) video and standard
(analog) audio inputs for connecting devices with
composite video output.
Note: VIDEO-1 input terminals are shared with
ColorStream HD-1 input terminals. When component
video cables are connected to the ColorStream HD-1
terminals and ColorStream HD-1 is the current input
mode, the VIDEO-1 input terminals will not carry any
signals.
Chapter 1: Introduction
TV back
Power cord
Cable Clamper
5
®
HD-2 —
® high-definition component
®
.
6 7
5 ANT — Antenna input that supports analog (NTSC)
antenna signals and analog cable TV signals.
6 PC IN — For use when connecting a personal computer
(- page 16).
7 HDMI ™ IN — High-Definition Multimedia Interface
input receives digital audio and uncompressed digital
video from an HDMI device, or uncompressed digital
video from a DVI device (- item 3, at left; also -
page 15).
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
9
HL37 (E/F) Web 213:276