Using The Pc Settings Feature; Setting The Pc Audio - Toshiba 26HL37 Owner's Manual

267470726HL37_EN.book Page 42 Friday, July 6, 2007 7:44 PM

Using the PC settings feature

You can view an image from a PC on the TV screen. The PC
must be connected to the TV's PC IN terminals.
(- page 16).
You can use a PC Settings feature to adjust the picture's
horizontal position/width, vertical position/height, clock
phase, and sampling clock.
Note: If a PC is not connected, this feature will be grayed out
in the Set Up menu.
To adjust the PC settings:
1
Repeatedly press + to select PC input mode
(- "Selecting the video input source to view" on page
30).
2
Press Y and open the Set Up menu.
3
Highlight PC Settings and press T.
AV Connection
PC Settings
MENU EXIT
Back
4
Press B or b to highlight the item you want to adjust.
5
Press C or c to make the appropriate adjustments.
PC Settings
Horizontal Position
Horizontal Width
Vertical Position
Vertical Height
Clock Phase
Sampling Clock
MENU Back EXIT
Horizontal Position:
•
Moves the picture left/right.
The adjustment range is within ±5 from center.*
Horizontal Width:
•
Adjusts the width of the picture.
The adjustment range is within ±5 from center.*
Vertical Position:
•
Moves the picture up/down.
The adjustment range is within ±5 from center.*
Vertical Height:
•
Adjusts the height of the picture.
The adjustment range is within ±5 from center.*
Clock Phase:
•
Helps to reduce noise and sharpen the picture.
The adjustment range is within ±15 from center.*
42
Chapter 6: Using the TV's features
Set Up 2/2
ENTER
ENTER
Exit
1/2
0
0
0
0
0
0
Exit
Sampling Clock:
•
Helps to minimize periodic vertical stripes on the screen.
The adjustment range is within ±15 from center.*
Reset:
•
To reset the PC setting, select Reset and press T.
*The range of adjustment may vary slightly.

Setting the PC Audio

This function allows you to output the sound from your PC (if
connected) or mute the sound from your PC and output the
sound from your HDMI (DVI) connection (- page 15).
To set the PC Audio:
1
Press Y and open the Set Up menu.
2
Highlight AV Connection and press T.
3
Press B or b to select PC/HDMI1 Audio, and then press
C or c to select PC or HDMI1.
AV Connection
PC/HDMI1 Audio
HDMI1 Audio
MENU Back EXIT Exit
PC: Mutes the sound from the HDMI device, and outputs
the sound from the PC
HDMI1: Mutes the sound from your PC, and outputs the
sound from the HDMI device
Note:
• The PC/HDMI1 Audio switch setting influences the
HDMI1 Audio setting. If it is set to HDMI1, the HDMI1
Audio setting changes to Auto. If it is set to PC, the
HDMI1 Audio setting is set to Digital and will be grayed
out.
• The PC IN and HDMI1 IN terminals share the audio
inputs labeled PC/HDMI1 (AUDIO) on the TV back
panel.
• If you have both a PC and an HDMI device connected
to the TV, use the PC Audio setting to specify which
audio (PC or HDMI) will be output from the TV's
speakers. Also see pages 15 and 16.
PC
Digital
HL37 (E/F) Web 213:276