Using The Picture Still; Adjusting The Picture Position - Analog Only; Resetting The Picture Position - Analog Only; Selecting The Picture Mode - Toshiba 57X3000A Owner's Manual

PC
Use this setting for PC via HDMI. When receiving 1080i,
1080p or 720p signal format of HDMI input, this setting will
display the image correctly without distortion or picture
clipping.
Notes:
• Using the special functions to change the size of the
displayed image (e.g. changing the height/width ratio) for
the purpose of public display or commercial gain may
infringe on copyright laws.
• If the aspect ratio of the selected format is different from the
one of the TV transmission or video program, it can cause a
difference in vision. Change to the correct aspect ratio
picture size.
• In the PC input mode (- page 25), the picture size
selection is wide or normal only.
• When using the PC input mode, the moving image quality
may be deteriorated.
• In the 720p input signal mode, the picture size selections
are Wide, Super Live 2, Cinema 2, 4:3, Super Live 1 and
Cinema 1.
• In Digital TV, the picture size selections are Super Live 1,
Cinema 1, Wide, Super Live 2, Cinema 2 and 4:3.
When receiving 1080i or 1080p signal, you can additionally
choose Exact Scan.
• When using Exact Scan you may observe a shift in picture
position. This is due to the signal source and is not a defect
of the TV.
• When DTV teletext (- page 28) or Subtitle (- page 31) is
displayed, the picture size selection is not available.

Using the picture still

• Press R to freeze the picture.
Even if an image is frozen on the TV screen, the pictures are
running on the input source. Audio continues to be output as
well.
To return to a moving picture, press R again.
(M ov i ng)
Notes:
• If you use this function except for the purpose of your private
viewing and listening, it may infringe the copyright protected
by the copyright laws.
• In the PC input mode (- page 25), this function is not
available.
Using the TV's features (General)
Adjusting the picture position
Adjustment to the position of the picture may be made to suit
your viewing preferences.
1
2
3
4
Note:
When the picture format is in Wide or 4:3 mode, only the
Horizontal position can be adjusted.
Resetting the picture position
This function resets your picture position settings to the factory
settings.
1
2

Selecting the picture mode

You can select the picture quality instantly among three preset
modes and one user-set mode.
• Press N to select the desired picture quality.
(S till)
Mode
q Dynamic
q Standard
q Mild
q Memory
Note:
In the PC input mode (- page 25), this mode is not available.
Press M, then press Y or Z to display the SET UP
menu.
Press the V or U to select Picture position.
SET UP
Language
Auto tuning
Manual tuning
ANT ATT
AV connection
Pi ture position
MENU Ba k EXIT Wat h TV
Press Q, then press V or U to select an item you want
to adjust.
Pi ture position
Horizontal position
Vertical position
Reset
MENU EXIT
Ba k Wat h TV
Press Y or Z to adjust the settings as required.
Horizontal position
From the Picture position menu, press V or U to
select Reset.
Press Q.
Dynamic
Picture quality
bright and dynamic picture
standard picture
soft picture
the picture quality you set
- analog only -
English
OK
OK
Off
OK
OK
0
0
OK
0
- analog only -
19