CA930
4
CB777
Drive Shaft Extension Models
4
Lubricate drive shaft grease fittings, at transom end, by applying approximately 10 - 12 pumps of grease from
a typical hand-operated grease gun using Quicksilver U-joint and Gimbal Bearing Grease.
5
Lubricate drive shaft grease fittings, at engine end, by applying approximately 3 - 4 pumps of grease from
a typical hand-operated grease gun using Quicksilver U-joint and Gimbal Bearing Grease.
54
71346
5
71347
INDEX