Selecting The Program Mode; Selecting The Water Window Option; Setting The Cycle Time - Toro TIS-240 User Manual

Selecting the Program Mode

1. W ithin the Program menu, turn the Upper Line knob to view
the following display:
SET PROGRAM MODE STA 01
Fully Automated
2. Fully Automated mode is selected by default. Turn the Lower Line
knob to select the User - With ET or User - No ET option as shown
in the example below:
SET PROGRAM MODE
User – With ET

Selecting the Water Window Option

1. Within the Program menu, turn the Upper Line knob to view
the following display:
USE WATER WINDOW
YES (end time 11:01pm)
The Use Water Window- YES option is selected by default. To
2.
select NO, turn the Lower Line knob.

Setting the Cycle Time

1. Within the Program menu, turn the Upper Line knob to view
the following display:
SET CYCLE TIME
05.0 Minutes
The station Cycle time is set to 05.0 minutes by default. To adjust the
2.
cycle time minutes digit(s) from 00 – 99, turn the Lower Line knob.
Note: Adjusting the Cycle time to 00 will disable the station from
automatic operation.
30
Sch A
STA 01
Sch U
STA 01
STA 01