Setting A Reference Et Value - Toro TIS-240 User Manual

Setting the Reference ET Value
By setting a Reference ET value based on the highest ET demand
period of the year, proper watering is ensured for the entire year.
1. Turn the Upper Line knob to view the following display:
REF. ET PART 1 STA 01
1.00 (Weekly ET 1.00)
2. The whole number of the Reference ET value is selected by default.
To adjust the value from 1 – 3, turn the Lower Line knob.
Note: The Reference ET value is adjustable from 0.50 – 3.99. The
whole number is only adjustable to 0 when the decimal number
value is .50 or higher.
3. Turn the Upper Line knob right one stop to select the decimal
number.
4.
Turn the Lower Line knob to adjust the decimal number value.
Note: If the selected station number uses the Set Days water
day schedule, Reference Month menu item will be accessable.
To adjust this setting, continue at step 5.
If the Set Days schedule is not used, continue at step 7.
Turn the Upper Line knob to view the following display:
5.
REFERENCE MONTH
JUL (7 days/week)
Turn the Lower Line knob to change the month.
6.
7. Turn the Upper Line knob to view the following display:
PROGRAM COMPLETE
STOP:
This completes the program setup process for a User-With ET
schedule format. To program additional stations, return to the
beginnning of Chapter 4 on page 21.
36
STA 01
STA 01