Appendix A - Troubleshooting; Appendix B - Gathering Site Data - Toro TIS-240 User Manual

A
Appendix A
Troubleshooting Guide
The landscape is too dry.
1. Turn the Function Selector knob to ADJUST.
2. Turn the Upper Line knob to select a station.
3. Turn Lower Line knob to adjust +5% and watch for 7 to 10 days.
4. If your landscape is still too dry, increase 5% each week until
stress is eliminated. This is the optimal level.
The landscape is too wet.
1. Turn the Function Selector knob to ADJUST.
2. Turn the Upper Line knob to select a station.
3. Turn the Lower Line knob to adjust -10% and watch your
landscape for 7 to 10 days.
4. If your landscape is still too wet, decrease 5% to 10% each week
until you see minor stress in you landscape.
5. When you see minor stress in your landscape, increase 5%
to set program at optimal level.
The controller continues to "Beep."
1. Turn the Function Selector knob to RUN.
Make sure the date and time settings are correct.
2.
3.
Phase(X)(L) (where X = the Phase identifier and L = Locked) will be
displayed. The Beep on Message alert tone option is automatically
turned On during the ET Everywhere activaton process. The alert tone
will automatically turn off at midnight.
4. Turn the Function Selector knob to HELP. .
Turn the Upper Line knob select BEEP on MESSAGE?
5.
from the Help menu.
6. Turn the Lower Line knob to select No.
7. Turn the Function Selector knob to RUN.
63