Planet VIP-5060PT User Manual
  1. Manuals
  2. Brands
  3. Planet Manuals
  4. IP Phone
  5. VIP-5060PT
  6. User manual

Planet VIP-5060PT User Manual

Professional hd poe ip phone 6-line
Hide thumbs Also See for VIP-5060PT:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Quick Manual
Professional HD PoE IP
Phone (6-Line)
VIP-5060PT

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VIP-5060PT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Planet VIP-5060PT

Summary of Contents for Planet VIP-5060PT

  • Page 1 Professional HD PoE IP Phone (6-Line) VIP-5060PT...
  • Page 2 PLANET. PLANET assumes no responsibility for any inaccuracies that may be contained in this User’s Manual. PLANET makes no commitment to update or keep current the information in this User’s Manual, and reserves the right to make improvements to this User’s Manual and/or to the products described in this User’s Manual, at any time without notice.
  • Page 3 WEEE as unsorted municipal waste and have to collect such WEEE separately. Trademarks The PLANET logo is a trademark of PLANET Technology. This documentation may refer to numerous hardware and software products by their trade names. In most, if not all cases, their respective companies claim these designations as trademarks or registered trademarks.

  • Page 4: Table Of Contents

    Professional HD PoE IP Phone VIP-5060PT Table of Contents     INTRODUCTION..........................7     ..........................10 EATURES     ..........................13 PPLICATION     ......................14 RODUCT PECIFICATIONS     ................18 HYSICAL SPECIFICATIONS AND PACKAGING     ............................. 19 EYPAD  ...
  • Page 5 Professional HD PoE IP Phone VIP-5060PT     ......................36 NONYMOUS     ..........................36     ..........................36     ..........................37 EDIAL     ........................37 ALL COMPLETION     ........................ 37 EADSET     ..........................37 OWER IGHT  ...
  • Page 6 Professional HD PoE IP Phone VIP-5060PT     APPENDIX............................97     ....................97 IGIT CHARACTER MAP TABLE     ..................97 REQUENTLY SKED UESTIONS - 6 -...

  • Page 7: Introduction

    Unified VoIP Communication System just like an extension call but no long distance call charge would occur. The VIP-5060PT also allows call to be transferred to anyone at any location within the voice system, which enables the enterprise to communicate more effectively and is helpful to streamline business processes.
  • Page 8 It provides 6 voice lines and dual 10/100/1000 Mbps Ethernet. Furthermore, the VIP-5060PT delivers user-friendly design containing a 128 x 64 LCD with white backlight, 4 Line keys and 4 soft keys. It supports 5 extension consoles with each consisting of 26 keys.
  • Page 9 VLAN can easily separate the data and voice, thus maintaining the best quality. Professional Application The VIP-5060PT supports Busy Lamp Field (BLF) function that, via the lights on the phone, enables users to easily identify the status of other phones which are connected to the same IP PBX, such as busy, idle, ringing, etc.

  • Page 10: Features

    Professional HD PoE IP Phone VIP-5060PT 1.1 Features 1.1 Features Highlights Dual 10/100/1000 Gigabit Ethernet (WAN, LAN) Supports SIP 2.0 (RFC3261) Supports six SIP voice lines IEEE 802.3af Power over Ethernet compliance Supports multiple road calls waiting in line Supports HD voice Supports SRTP and Busy Lamp Field (BLF) Supports 5 extension consoles;...
  • Page 11 Professional HD PoE IP Phone VIP-5060PT SIP Applications Call forward / Transfer (blind/attended) Call Holding / Waiting 3-way conference Paging and Intercom Call park / Call pickup / Join call Redial and click to dial Secondary dialing automatically Incoming calls /outgoing calls / missed calls (Each supports 100 records)
  • Page 12 Professional HD PoE IP Phone VIP-5060PT Local and Remote Syslog (RFC 3164) SNTP Time Synchronization TR069 - 12 -...

  • Page 13: Application

    Professional HD PoE IP Phone VIP-5060PT 1.2 Application 1.2 Application Enterprise IP PBX Deployment of VIP-5060PT - 13 -...

  • Page 14: Product Specifications

    Professional HD PoE IP Phone VIP-5060PT 1.3 Product Specifications 1.3 Product Specifications Product VIP-5060PT Hardware Lines (Direct Numbers) 6-Line enterprise-class IP phone Display 80 x 43mm/ 128 x 64 pixel LCD with blue backlight 4 line keys 8 DSS keys...
  • Page 15 Professional HD PoE IP Phone VIP-5060PT SIP version 2 (RFC 3261, 3262, 3263, 3264) SIP supported STUN (RFC 3489) Message Waiting Indicator (RFC 3842) Voice algorithms: - G.711 (A-law and μ-law) - G.7231 high/low - G.729a/b Voice Gateway - G.722.1 - G.726...
  • Page 16 Professional HD PoE IP Phone VIP-5060PT Support 5 ext. consoles with each consisting of 26 keys Soft keys programmable; function keys programmable Multilanguage realizes localization Echo cancellation: Supports G.168, and Hands-free can support 96ms, Hands-free Speaker Phone Supports Voice Gain Setting, VAD, CNG...

  • Page 17: Power Requirements

    Professional HD PoE IP Phone VIP-5060PT Network Features WAN/LAN: 10/100M Ethernet ports, supports Bridge modes. Supports bridge working as hub Supports PPPoE for xDSL and PoE Supports 802.1 VLAN(voice VLAN/data VLAN) Supports DHCP client on WAN Supports main DNS and secondary DNS server.

  • Page 18: Physical Specifications And Packaging

    Professional HD PoE IP Phone VIP-5060PT 1.4 Physical specifications and packaging Physical Specifications Dimensions Dimensions 290 (L) x 260 (W) x 60 (H) mm Net Weight 950g (without package) BASIC PACKAGING SIP IP Phone unit Power Adapter Quick Installation Guide CD-ROM containing the on-line manual.

  • Page 19: Keypad

    Professional HD PoE IP Phone VIP-5060PT 1.5 Keypad Keypad, LED, and function key definitions Keypad Description Key Name Function Description Assists you in selecting an item that you want to process Navigation under the menu by pressing the Up, Down, Right or Left button.
  • Page 20 Professional HD PoE IP Phone VIP-5060PT Key Name Function Description mode. Press this key in calling mode and you can hear the other Mute side, but the other side cannot hear you. Turn down or turn up the volume by pressing the “-“ key or Volume -/+ the “+”...
  • Page 21 Professional HD PoE IP Phone VIP-5060PT Rear view and panel descriptions Keypad Description Port Port name Description Input: 5V AC, 1A Power switch 10/100/1000M Connect it to Network 10/100M/1000 Connect it to PC External console Port type: RJ-11 direct connector...

  • Page 22: Icon Introduction

    Professional HD PoE IP Phone VIP-5060PT 1.6 Icon introduction Icon Description Call out Call in Call hold Auto answer Call mute Contact DND(Do not Disturb) In hand-free mode In handset mode In headset mode Missed call Call forward 1.7 LED introduction...
  • Page 23 Professional HD PoE IP Phone VIP-5060PT Table 2 Programmable key LED for Presence LED Status Description Steady green The object is online. Slow blinking red The object is ringing. The object is active. Steady red Fast blinking red The object failed.

  • Page 24: Initial Connection And Login

    Plug one end of the handset cord into the handset and the other end into the handset jack Step 2. Connecting Power System The VIP-5060PT can be powered either by external AC/DC adapter or by connecting to an IEEE802.3af/at PSE device such as 802.3af Injector / Hub or 802.3af/at POE switch.
  • Page 25 Set your computer’s IP address to 192.168.0.x, where x is a number between 2 to 254 (except 1 where is being used for the phone by default). If you don’t know how to do this, please ask your network administrator. Connect your PC to VIP-5060PT PC port. Step 5. Login Prompt Use web browser (Internet Explorer 6.0 or above) to connect to 192.168.0.1 (type this address in the...

  • Page 26: Basic Functions

    Professional HD PoE IP Phone VIP-5060PT Basic Functions 3.1 Making a call Call Device 3.1.1 User can make a phone call via the following devices: icon will be shown on the idle screen. 1. Pick up the handset, 2. Press the Speaker button, icon will be shown on the idle screen.

  • Page 27: Dnd

    Professional HD PoE IP Phone VIP-5060PT 3. Then press the Save to save the changes. 3.3 DND 3.7 Mute Press DND softkey to activate DND Mode. Further incoming calls will be rejected and the display shows: icon. Press DND softkey twice to deactivate DND mode. User can find the incoming call record in the Call History.

  • Page 28: Call Transfer

    Professional HD PoE IP Phone VIP-5060PT will be shown on the LCD. Then the called will not hear User, but User can hear the called. Press it again to get the phone to normal conversation. 3.8 Call transfer Blind Transfer During talking, press the key “Transf”, and then dial the number that User wants to transfer to, and finish by...

  • Page 29: Multiple - Way Call

    Professional HD PoE IP Phone VIP-5060PT 3.3 DND Press DND softkey to activate DND Mode. Further incoming calls will be rejected and the display shows: icon. Press DND softkey twice to deactivate DND mode. User can find the incoming call record in the Call History.

  • Page 30: Advanced Functions

    Professional HD PoE IP Phone VIP-5060PT 3.7 Mute Press Mute button during the conversation, icon will be shown on the LCD. Then the called will not hear User, but User can hear the called. Press it again to get the phone to normal conversation.

  • Page 31: Click To Dial

    Professional HD PoE IP Phone VIP-5060PT *3* is appointed prefix code. After making the above configuration, A can dial *3* plus B’s phone number to make the redial function. *4* is appointed prefix code. After configuration, A can dial *4* to cancel redial function.

  • Page 32: Memo

    Professional HD PoE IP Phone VIP-5060PT 3. After viewing the new message, User can press Reply to reply the message, and use the 2aB softkey to change the Input Method. When entering the reply message, press OK, and then use the navigation keys to select the line from which User wants to send, then Send.

  • Page 33: Programmable Key Configuration

    Professional HD PoE IP Phone VIP-5060PT 4.9 Programmable Key Configuration The phone has 4 programmable keys which are able to set up many functions. The following list shows the functions User can set on the programmable keys and provides a description for each function. The default configuration for each key is N/A which means the key hasn’t been set for any functions.

  • Page 34: Call Park

    Professional HD PoE IP Phone VIP-5060PT Call Park User needs to set a server number when User has set what represents Call park. If User has a call but busy to receive the call, User can press the key and hear a number. Then User can choose another phone and input this number, so User can directly recover call.
  • Page 35 Professional HD PoE IP Phone VIP-5060PT 6. Set the type as BLF List Key It needs the cooperation with the Broadsoft server. The traditional BLF is that every number will need to be subscribed, so if the numbers that are subscribed are so many, it will cause obstruction. However, BLF List Key will put the numbers that are needed to be subscribed in a group.

  • Page 36: Other Functions

    Professional HD PoE IP Phone VIP-5060PT 5 Other Functions 5.1 Auto Handdown Press Menu Features Enter Auto Handdown Enter. Set the Mode Enable through the navigation key, then set Time, unit is minute, then press Save. When the call ends, after the time that User has set, the phone will return to the idle mode.

  • Page 37: Auto Redial

    Professional HD PoE IP Phone VIP-5060PT 5.5 Auto Redial 1. Press Menu Features Enter Auto Redial Enter. 2. Choose Mode Enabled or Disabled through the navigation key. If User chooses Enable, User also needs to set Interval and Times, and then press Save.

  • Page 38: Ban Outgoing

    Professional HD PoE IP Phone VIP-5060PT others and need to input the DTMF, the DTMF will show as User has set. 5.10 Ban Outgoing 1. Press Menu Features Ban Outgoing Enter. 2. Enable this function; User cannot call any number.

  • Page 39: Basic Settings

    Professional HD PoE IP Phone VIP-5060PT 6 Basic settings 6.1 Keyboard 1. Press Menu Settings Enter Basic Settings Enter Keyboard Enter. 2. There are four items: DSS Key settings, Programmable Keys, Desktop Long Pressed, SoftKey, and User can set up respectively on them. Press the key Enter to the interface, then use the navigation keys to choose the function for the key according to User’s requirements.

  • Page 40: Greeting Words

    2. User can enter the message and press Save. It will display on the phone screen when the phone starts up. 6.7 Language 1. Press Menu Settings Enter Basic Settings Enter Language Enter. 2. The VIP-5060PT supports three languages. User can use the navigation keys to choose. The default two languages are English and Chinese. - 40 -...

  • Page 41: Advanced Settings

    Professional HD PoE IP Phone VIP-5060PT 7 Advanced Settings 7.1 Accounts Press Menu Enter Advanced settings, and then input the password to enter. The default password is 123. User can set it through the web page. Then choose Account and then press Enter. User can do some sip settings.

  • Page 42: Web Configuration

    Professional HD PoE IP Phone VIP-5060PT 8 Web Configuration 8.1 Introduction of configuration Ways to configure 8.1.1 The VIP-5060PT has three different ways for different users. Use phone keypad. Use web browser (recommended way). Use telnet with CLI command. Password Configuration 8.1.2 There are two levels to access to phone: root level and general level.

  • Page 43: Configuration Via Web

    Professional HD PoE IP Phone VIP-5060PT left side of the screen to save User configuration. Otherwise, the phone will lose User modification after power is off and on. 8.3 Configuration via WEB BASIC 8.3.1 8.3.1.1 STATUS Status Field name Explanation...
  • Page 44 Wizard Please select the proper network mode according to the network condition. The VIP-5060PT provides three different network settings: Static: If User ISP server provides User with the static IP address, please select this mode, and then finish Static Mode setting. If User doesn’t know about parameters of Static Mode setting, please refer to User ISP.
  • Page 45 Professional HD PoE IP Phone VIP-5060PT IP Address Input the IP address distributed to User. Subnet Mask Input the subnet mask distributed to User. IP Gateway Input the Gateway address distributed to User. Set DNS domain postfix. When the domain which User input...
  • Page 46 Professional HD PoE IP Phone VIP-5060PT Display detailed information about User manual config. Choose DHCP mode and click Next to config SIP (default SIP1) simply. Click Back to return to the last page, like static IP mode. Choose PPPoE mode and click Next to config the PPPoE account/password and SIP (default SIP1) simply.
  • Page 47 Professional HD PoE IP Phone VIP-5060PT 8.3.1.3 CALL LOG User can check all the outgoing calls on this page shown below: Call Log Field name Explanation Start Time Display the start time of the outgoing record. Duration Display the conversation time of the outgoing record.

  • Page 48: Network

    Professional HD PoE IP Phone VIP-5060PT The maximum length of the greeting message is 12 English characters and 5 Chinese characters. NETWORK 8.3.2 8.3.2.1 WAN WAN Status - 48 -...
  • Page 49 Shows the time of getting MAC address Please select the proper network mode according to the network condition. The VIP-5060PT provides three different network settings: Static: If User ISP server provides User with the static IP address. Please select this mode, and then finish Static Mode setting.
  • Page 50 2) If User modifies the IP address, the web will not response by the old IP address. User needs to input new IP address in the address column to logon in the phone. VIP-5060PT LAN is fixed to bridge mode, so it doesn’t have programming page. 8.3.2.2 QoS&VLAN The VOIP phone supports 802.1Q/P protocol and DiffServ configuration.
  • Page 51 Professional HD PoE IP Phone VIP-5060PT In chart 1, there is a layer 2 that switches go without setting VLAN. Any broadcast frame will be transmitted to the other ports except the send port. For example, a broadcast information is sent out from port 1 then transmitted to ports 2, 3 and 4.
  • Page 52 Professional HD PoE IP Phone VIP-5060PT QoS Configuration Link Layer Discovery Protocol (LLDP) Settings Enable LLDP Enable LLDP by selecting it. After enabling LLDP Learn, telephone can automatically learn the data of DSCP, 802.1p, VLAN ID from the switch. If the data is...
  • Page 53 Professional HD PoE IP Phone VIP-5060PT different from WAN ID. Specify the value of the Port VLAN ID different from WAN ID, the LAN Port VLAN ID range of the value is 0-4095. 8.3.2.3 SERVICE PORT User can set the port of telnet/HTTP/RTP on this page.
  • Page 54 Professional HD PoE IP Phone VIP-5060PT 1) User needs to save the configuration and reboot the phone after setting this page. 2) Please reboot the system if User modifies the HTTP or telnet port number (the new number should be greater than 1024).
  • Page 55 Professional HD PoE IP Phone VIP-5060PT phone will automatically synchronize the standard time. Primary Server Set SNTP Primary Server IP address. Secondary Server Set SNTP Secondary Server IP address. Time Zone Select the Time zone according to User location. Resync Period Set the time out, the default is 60 seconds.

  • Page 56: Voip

    Professional HD PoE IP Phone VIP-5060PT VOIP 8.3.3 8.3.3.1 SIP Set User SIP server in the following interface. - 56 -...
  • Page 57 Professional HD PoE IP Phone VIP-5060PT SIP Config Field name Explanation SIP Line Choose line to set info about SIP, there are 4 lines to choose. User can switch by【Load】 button. Basic Settings Status Shows if the phone has been registered the SIP server or not;...
  • Page 58 Professional HD PoE IP Phone VIP-5060PT or so, show Unapplied. Server Address Input User SIP server address. Server Port Set User SIP server port. Authentication User Input User SIP register account name. Authentication Password Input User SIP register password. SIP User Input the phone number assigned by User VoIP service provider.
  • Page 59 Professional HD PoE IP Phone VIP-5060PT Time Type is No answer, incoming calls will be forwarded after the no answer forward wait time. Enable Hot Line Specify Hot Line by selecting it. Specify Hot Line Number, the phone dial the hot line number...
  • Page 60 Professional HD PoE IP Phone VIP-5060PT please enter the On Code and Off Code option, then when User choose to enable/disable following function on User IP phone, it will send message to the server, and the server will turn on/off the function immediately.
  • Page 61 Professional HD PoE IP Phone VIP-5060PT Set the Anonymous On Code, When User choose to enable the anonymous call function on User IP phone, it will send Anonymous On Code information to the server, and the server will enable the anonymous call function for User IP phone automatically.
  • Page 62 Professional HD PoE IP Phone VIP-5060PT Enable/Disable Keep Authentication System will take the last authentication field which is passed the authentication by Keep Authentication server to the request packet. It will decrease the server’s repeat authorization work, if it is enable.
  • Page 63 Professional HD PoE IP Phone VIP-5060PT 8.3.3.2 STUN In this web page, Users can config SIP STUN. STUN: By STUN server, the phone in private network could know the type of mapping IP and port of SIP. The phone might register itself to SIP server with global IP and port to realize the device both calling and being called in private network.
  • Page 64 Professional HD PoE IP Phone VIP-5060PT penetrate NAT, while False means not. Server Address Set User SIP STUN Server IP address. Server Port Set User SIP STUN Server Port. Set STUN blinding period(s). If NAT server finds that a NAT...
  • Page 65 Professional HD PoE IP Phone VIP-5060PT To save the memory and avoid abundant input of user, add the follow functions: 1.* Match any single digit that is dialed. If user makes the above configuration, after user dials 11 digit numbers started with 13, the phone will send out 0 plus the dialed numbers automatically.
  • Page 66 Professional HD PoE IP Phone VIP-5060PT desired prefix number and T; then dial the prefix and a phone number to realize calling to what User prefix number is mapped. The prefix number supports at most 30 digits. Set Destination address. This is optional config item. If User want...
  • Page 67 Professional HD PoE IP Phone VIP-5060PT Examples of different alias applications Set by web Explanation Example User need set phone number, Destination, Alias and Delete Length. Phone number is XXXT; Destination is 255.255.255.255 (0.0.0.2) and Alias is del. If User dials “93333”, This means any phone No.

  • Page 68: Phone

    Professional HD PoE IP Phone VIP-5060PT If User dialed phone number When User dial starts with User set phone “147”, the SIP1 number. The phone will send server will receive out User dialed phone number “1470011”. adding suffix number. PHONE 8.3.4...
  • Page 69 Professional HD PoE IP Phone VIP-5060PT Handset Input Volume Specify Input (MIC) Volume grade. G729AB Payload Set G729 Payload Length. Length Specify the least reflection time of Hand down, the default is Onhook Time 200ms. Default Ring Type Select Ring Type.
  • Page 70 Professional HD PoE IP Phone VIP-5060PT FEATURE Field name Explanation Select DND, the phone will reject any incoming call, the callers will be Do Not Disturb reminded by busy, but any outgoing call from the phone will work well. If User select Ban Outgoing to enable it, and User cannot dial out any Ban Outgoing number.
  • Page 71 Auto Redial Specify the Auto Redial interval. Times Open this function, if there is a headphones in VIP-5060PT, User can press Auto Headset “ answer” key or line key to answer a call with the headset Enable Call Enable Call Completion by selecting it.
  • Page 72 Professional HD PoE IP Phone VIP-5060PT After the password prefix will be hidden as *, N stand for the value which User enter in the Password Length field. For example: User set the password prefix is 3, enter the Password Length is 2, then User enter the number 34567, it will display 3**67 on the phone.
  • Page 73 Professional HD PoE IP Phone VIP-5060PT 8.3.4.3 DIAL PLAN This system supports 4 dial modes: 1) End with “#”: dial User desired number, and then press #. 2) Fixed Length: the phone will intersect the number according to User specified length.
  • Page 74 Professional HD PoE IP Phone VIP-5060PT （ ） Set the timeout of the last dial digit. The call will be sent after Send after 3-30 timeout. seconds Enable Blind Transfer On Hook, when executing Blind Transfer Press # to Do Blind...
  • Page 75 Professional HD PoE IP Phone VIP-5060PT 8.3.4.4 CONTACT User can input the name, phone number and select ring type for each name here. Contact Field name Explanation Phonebook Table Name Shows the name corresponding to the phone number. - 75 -...
  • Page 76 Professional HD PoE IP Phone VIP-5060PT （ ） Set the timeout of the last dial digit. The call will be sent after Send after 3-30 timeout. seconds Enable Blind Transfer On Hook, when executing Blind Transfer Press # to Do Blind...
  • Page 77 Note: End with DOT (.) when set up the white list. 8.3.4.5 REMOTE CONTACT User needs to match a XML Phonebook address and User can directly access to the corresponding remote phonebook on the phone. For example: Set the Phonebook Name as Planet, Server URL is tftp://192.168.1.3/admin/phonebook/index.xml. - 77 -...
  • Page 78 Professional HD PoE IP Phone VIP-5060PT Or Set the Phonebook Name as ldap, Server URL is ldap://192.168.1.3/dc=winline,dc=com. Remote Phonebook Setting Phonebook Name Custom the phonebook name displayed on the phone. Server URL Specify the server url of the remote phonebook.
  • Page 79 Professional HD PoE IP Phone VIP-5060PT greater than 1024 If multicast codec is G722, the LCD screen will displays "HD", which means the phone is sending high-definition voice stream Operate steps: 1. When the phone is idle, press multicast key Multicast RTP stream is send to pre-configured multicast address (IP: Port).
  • Page 80 Professional HD PoE IP Phone VIP-5060PT enabled, the phone will automatically ignore all incoming multicast RTP stream. Web page is set as follows: Now multicast “ss” has higher priority than multicast “ee”, the highest priority is for normal calls Notice: When a multicast session begins, multicast sender and receiver will beep 8.3.4.8 Tone...

  • Page 81: Function Key

    Professional HD PoE IP Phone VIP-5060PT Specify the Action URL that Record the operation of phone, send these corresponding information to server, url:http://InternalServer /FileName.xml?(Internal Server is server ip, FileName is name of xml that contains the action message ) FUNCTION KEY 8.3.5...
  • Page 82 Professional HD PoE IP Phone VIP-5060PT Show the function key's serial number. Memory Key: settings can be stored in key storage for each number, the standby or off-hook, select the function keys on the keyboard can call this number. Type Line, set the dial mode (Auto, SIP1 to SIP6).Key Event...
  • Page 83 Professional HD PoE IP Phone VIP-5060PT 8.3.5.2 EXIT KEY EXT KEY has the same usage with the Function key. “In” port connects the phone, “Out” port connects the next one, if there is only, User don’t need for power supply, if there are more than one, User need supply 5V power for the first one, and use RJ-45 direct connector.

  • Page 84: Maintenance

    8.3.6 8.3.6.1 Auto Provision Planet endpoint supports PnP and DHCP and Phone Flash to obtain the parameters. The PnP and DHCP and Phone Flash are all deployed, endpoint will go by the following process to try to obtain the server...
  • Page 85 Professional HD PoE IP Phone VIP-5060PT Field name Explanation Auto Provision Setting Show the current config file’s version. If the version of the configuration downloaded is higher than the version of the running configurations, the auto provision would upgrade, or stop Current Config Version here.
  • Page 86 Professional HD PoE IP Phone VIP-5060PT PnP Interval Specify the Interval time, unit is hour. Phone Flash Set FTP/TFTP/HTTP server IP address for auto update. The Server Address address can be IP address or Domain name with subdirectory. Set configuration file’s name which need to update. System will Config File Name use MAC as config file name if config file name keep blank.
  • Page 87 Professional HD PoE IP Phone VIP-5060PT Syslog Configuration Field name Explanation Syslog Setting Server Address Set Syslog server IP address. Server Port Set Syslog server port. MGR Log Level Set the level of MGR log. SIP Log Level Set the level of SIP log.
  • Page 88 Professional HD PoE IP Phone VIP-5060PT 8.3.6.3 CONFIG Config Setting Field name Explanation User can save all changes of configurations. Click the Save Save Configuration button, all changes of configuration will be saved, and be effective immediately. Right clicks on “Right click here…” and select “Save Target As config File(.txt)”...
  • Page 89 Professional HD PoE IP Phone VIP-5060PT 8.3.6.4 UPDATE User can update User configuration with User config file in this web page. Update Field name Explanation Web Update Click the browse button, find out the config file saved before or provided by manufacturer, download it to the phone directly, Web Update press “Update”...
  • Page 90 Professional HD PoE IP Phone VIP-5060PT 1. Application update: download system to update file. 2. Config file export: Upload the config file to FTP/TFTP server, name and save it. 3. Config file import: Download the config file to phone from FTP/TFTP server.
  • Page 91 Professional HD PoE IP Phone VIP-5060PT Access Configuration Field name Explanation Set the password for entering the setting menu of the phone by Keyboard Password the phone‘s key board. The password is digit. This table shows the current user existed.

  • Page 92: Security

    Professional HD PoE IP Phone VIP-5060PT SECURITY 8.3.7 8.3.7.1 WEB FILTER WEB Filter User could make some device own IP, which is pre-specified, access to the MMI of the phone to config and manage the phone. Field name Explanation Web Filter Table Settings: Add or delete the IP address segments that access to the phone.
  • Page 93 Professional HD PoE IP Phone VIP-5060PT 8.3.7.2 FIREWALL Firewall Configuration In this web interface, User can set up firewall to prevent unauthorized Internet users from accessing private networks connected to the Internet (input rule), or prevent unauthorized private network devices from accessing the Internet (output rule).
  • Page 94 Professional HD PoE IP Phone VIP-5060PT Set the destination address. It can be IP address, network Des Address address, complete address 0.0.0.0, or network address similar to *.*.*.*. Set the source address’ mask. For example, 255.255.255.255 Src Mask means just point to one host; 255.255.255.0 means point to a network which network ID is C type.
  • Page 95 Professional HD PoE IP Phone VIP-5060PT VPN Configuration Field name Explanation VPN IP Shows the current VPN IP address. Select L2TP. User can choose only one for current state. After User select it, User’s better save configuration and reboot User phone.

  • Page 96: Logout

    Professional HD PoE IP Phone VIP-5060PT 8.3.7.4 SECURITY Security Field name Explanation Update Security File Select the security file User want to update, then click Update Select Security File button to update. Delete Security File Select the security file User want to delete, then click Delete Select Security File button to update.
  • Page 97 Professional HD PoE IP Phone VIP-5060PT 9 Appendix 9.1 Digit-character map table Keypad Character Keypad Character 7 P Q R S p q r s 2 A B C a b c 8 T U V t u v 3 D E F d e f...
  • Page 98 A7: Before dialing out, press the correspondence line number you want to use. For example, if User wants to use Line 2 to dial out, please press Line 2. VIP-5060PT physical line is only 4 lines, the 5 and 6...
  • Page 99 Professional HD PoE IP Phone VIP-5060PT Q8: How to set up the BLF function in the VIP-5060PT? A8: Before we start, please be reminded your IPPBX must also support BLF function. In Function key / EXT Key. Type: please chose Memory Key...
  • Page 100 Professional HD PoE IP Phone VIP-5060PT On VoIP / SIP page, please follow the messages below: SIP line: choose the line you want to register Server address: the IPX-2100 IP address Server port: Server register port default is 5060 Authentication user: 800 (the extension you create in IPX-2100) SIP user: (the extension you create in IPX-2100) Display name: the name you want to display on phone screen when pressing the line button.

Table of Contents